Design and Analysis of Hybrid Energy System

International Journal of Electrical and Electronics Engineering

© 2017 by SSRG - IJEEE Journal

Volume 4 Issue 5

Year of Publication : 2017

Authors : Faisal Tanvir

10.14445/23488379/IJEEE-V4I5P101

How to Cite?

Faisal Tanvir, "Design and Analysis of Hybrid Energy System," SSRG International Journal of Electrical and Electronics Engineering, vol. 4,  no. 5, pp. 1-5, 2017. Crossref, https://doi.org/10.14445/23488379/IJEEE-V4I5P101

Abstract:

This paper presents a study on of hybrid solar and wind energy systems behaviour, which allows employing renewable and variable in time energy sources with a continuous supply. Solar energy is not a revolutionary technology by any means and has long been criticized for its inefficiency and other shortcomings. "What do we do when the sun goes away every night”? Well with batteries, of course! But it's not that simple, the battery currents and voltages need to be regulated to provide optimum power transfer to the client because efficiency reduces cost and high cost is the last major road block in making solar &wind feasible energy alternative. The heart of our product then is microprocessor control of the stored energy. The approach taken was essentially an embedded systems approach. We needed to interface the microprocessor, with some current/voltage limiting hardware, a voltage regulator, relay, and various other necessary components to effectively read the currents coming off the panels and entering the batteries, and those currents leaving the batteries to power some desired application.

Keywords:

Solar, control, hybrid energy, renewable energy, wind.

References:

[1] M. D. Al-Falahi and M. Z. C. Wanik, "Modeling and performance analysis of hybrid power system for residential application," in Power Engineering Conference (AUPEC), 2015 Australasian Universities, 2015, pp. 1-6.
[2] W. Zhou, C. Lou, Z. Li, L. Lu, and H. Yang, "Current status of research on optimum sizing of stand-alone hybrid solar–wind power generation systems," Applied Energy, vol. 87, pp. 380- 389, 2010.
[3] A. Chauhan and R. P. Saini, "A review on Integrated Renewable Energy System based power generation for standalone applications: Configurations, storage options, sizing methodologies and control," Renewable and Sustainable Energy Reviews, vol. 38, pp. 99-120, 2014.
[4] Y. Kalinci, A. Hepbasli, and I. Dincer, "Techno-economic analysis of a stand-alone hybrid renewable energy system with hydrogen production and storage options," International Journal of Hydrogen Energy, vol. 40, pp. 7652-7664, 2015.
[5] M. D. Al-Falahi, K. S. Nimma, S. Jayasinghe, and H. Enshaei, "Sizing and modeling of a standalone hybrid renewable energy system," in Power Electronics Conference (SPEC), IEEE Annual Southern, 2016, pp. 1-6.
[6] A. Kornelakis, "Multiobjective Particle Swarm Optimization for the optimal design of photovoltaic grid-connected systems," Solar Energy, vol. 84, pp. 2022-2033, 2010.
[7] M. Sharma, L. k. Deegwal, and N. K. Gupta, "FACTS Devices in Renewable Energy Plants to solve Power System issues," SSRG International Journal of Electrical and Electronics Engineering, vol. 3, 2016.
[8] A. Kornelakis and Y. Marinakis, "Contribution for optimal sizing of grid-connected PV-systems using PSO," Renewable Energy, vol. 35, pp. 1333-1341, 2010.
[9] A. Mahesh and K. S. Sandhu, "Hybrid wind/photovoltaic energy system developments: Critical review and findings," Renewable and Sustainable Energy Reviews, vol. 52, pp. 1135-1147, 2015.
[10] M.Soundariyan, R. P. Kumar, and M.Vetrivel, "Advanced Predictive Model Based Grid-PV System with MPPT Technique using Quasi Impedance Source Inverter," SSRG International Journal of Electrical and Electronics Engineering, vol. 3, 2016.
[11] A. Pérez-Navarro, D. Alfonso, H. E. Ariza, J. Cárcel, A. Correcher, G. Escrivá-Escrivá, et al., "Experimental verification of hybrid renewable systems as feasible energy sources," Renewable Energy, vol. 86, pp. 384-391, 2016.
[12] I. Tégani, A. Aboubou, M. Y. Ayad, M. Becherif, R. Saadi, and O. Kraa, "Optimal Sizing Design and Energy Management of Stand-alone Photovoltaic/Wind Generator Systems," Energy Procedia, vol. 50, pp. 163-170, 2014.
[13] A. Maleki and F. Pourfayaz, "Optimal sizing of autonomous hybrid photovoltaic/wind/battery power system with LPSP technology by using evolutionary algorithms," Solar Energy, vol. 115, pp. 471-483, 2015.
[14] L. Olatomiwa, S. Mekhilef, A. S. N. Huda, and O. S. Ohunakin, "Economic evaluation of hybrid energy systems for rural electrification in six geo-political zones of Nigeria," Renewable Energy, vol. 83, pp. 435-446, 2015.
[15] K. Nikum, R. Saxena, and A. wagh, "Cost Optimization of PV-Wind- Battery-Grid Connected hybrid system," SSRG International Journal of Electrical and Electronics Engineering, vol. 3, 2016.
[16] M. Al‐Falahi, F. Fadaeifard, M. Al‐Falahi, B. Bin Baharudin, and T. Hong, "Surface damages and tool wear mode in end milling of hastelloy ‐C276 under dry and wet conditions," Materialwissenschaft und Werkstofftechnik, vol. 47, pp. 1182- 1192, 2016.