Non-Destructive Test on Concrete Blended with Partially Replaced Recycled Coarse Aggregate and Seashore Sand
| International Journal of Civil Engineering |
| © 2023 by SSRG - IJCE Journal |
| Volume 10 Issue 6 |
| Year of Publication : 2023 |
| Authors : D. Kalaimani, G. Srinivasan |
10.14445/23488352/IJCE-V10I6P106
How to Cite?
D. Kalaimani, G. Srinivasan, "Non-Destructive Test on Concrete Blended with Partially Replaced Recycled Coarse Aggregate and Seashore Sand," SSRG International Journal of Civil Engineering, vol. 10, no. 6, pp. 54-64, 2023. Crossref, https://doi.org/10.14445/23488352/IJCE-V10I6P106
Abstract:
The extraction of natural aggregates is depleting the sources and posing a challenge for producing technically and environmentally suitable concrete. To mitigate ecological and environmental concerns arising from excessive mining, the utilization of Recycled Coarse Aggregate (RCA) and seashore sand is being explored as a viable solution. This research paper assesses concrete's strength and durability characteristics by partially substituting recycled coarse aggregates and seashore sand, employing non-destructive tests like the Rebound hammer test, Ultrasonic pulse velocity, Carbonation test, and Half-cell potentiometer test. The findings are compared with conventional concrete, revealing that the partial incorporation of alternative materials like RCA and seashore sand yields significant enhancements in concrete strength and durability.
Keywords:
Carbonation test, Half-cell potentiometer test, Rebound hammer test, Recycled coarse aggregates, Seashore sand, Ultrasonic pulse velocity.
References:
[1] Sallehan Ismail, and Mahyuddin Ramli, “Mechanical Strength and Drying Shrinkage Properties of Concrete Containing Treated Coarse Recycled Concrete Aggregates,” Construction and Building Materials, vol. 68, pp. 726–739, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Syed Minhaj Saleem Kazmi et al., “Effect of Recycled Aggregate Treatment Techniques on the Durability of Concrete: A Comparative Evaluation,” Construction and Building Materials, vol. 264, pp. 120–284, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[3] S Syed Minhaj Saleem Kazmi et al., “Axial Stress Strain Behavior of Macro-Synthetic Fiber Reinforced Recycled Aggregate Concrete,” Cement and Concrete Composites, vol. 97, pp. 341–356, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Muhammad Junaid Munir et al., “Stress Strain Performance of Steel Spiral Confined Recycled Aggregate Concrete,” Cement and Concrete Composites, vol. 108, pp. 103–535, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[5] I. F. Sáez del Bosque et al., “Properties of Interfacial Transition Zones (ITZs) in Concrete Containing Recycled Mixed Aggregate,” Cement and Concrete Composites, vol. 81, pp. 25–34, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[6] Jiake Zhang et al., “Performance Enhancement of Recycled Concrete Aggregates through Carbonation,” Journal of Materials in Civil Engineering, vol. 27, no. 11, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[7] Kho Pin Verian, Warda Ashraf, and Yizheng Cao, “Properties of Recycled Concrete Aggregate and Their Influence in New Concrete Production,” Resources, Conservation and Recycling, vol. 133, pp. 30–49, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Rasha H Ali, “Investigation of Ferrocement Bricks Properties with Different Recycled Coarse Aggregates,” SSRG International Journal of Civil Engineering, vol. 8, no. 6, pp. 48-52, 2021.
[CrossRef] [Publisher Link]
[9] Mark Alexander, and Sidney Mindess, Aggregates in Concrete, Taylor & Francis, 2005.
[Google Scholar] [Publisher Link]
[10] Liang Wang et al., “An Environmentally Friendly Method to Improve the Quality of Recycled Concrete Aggregates,” Construction and Building Materials, vol. 144, pp. 432–444, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[11] J. Limeira, L. Agullo, and M. Etxeberria, “Dredged Marine Sand as a New Source for Construction Materials,” Materiales de Construcción, vol. 62, no. 305, pp. 7–24, 2012.
[CrossRef] [Publisher Link]
[12] S. Hasdemir, A. Tugrul, and M. Yilmaz, “The Effect of Natural Sand Composition on Concrete Strength,” Construction and Building Materials, vol. 112, pp. 940–948, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[13] J. Limeira et al., “Mechanical and Durability Properties of Concrete Made with Dredged Sea Sand,” Construction and Building Materials, vol. 25, pp. 4165–4174, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[14] B. Naga Niranjan Kumar et al., “An Experimental Study on Sea Sand by Partial Replacement of Sea Sand in Concrete,” International Journal of Scientific Research in Science and Technology, vol. 2, no. 2, pp. 181–184, 2016.
[Google Scholar] [Publisher Link]
[15] Surya. I, Surya.M, and Deepan Chakravarthi. A.V., “Experimental Investigation of Fly Ash Based Solid Block Masonry Prism by Using M-Sand as Partial Replacement of Fine Aggregate,” International Journal of Recent Engineering Science, vol. 7, no. 3, pp. 25-29, 2020.
[CrossRef] [Publisher Link]
[16] Caiyi Chen et al., “Workability, Mechanical Properties and Affinity of Artificial Reef Concrete,” Construction and Building Materials, vol. 98, pp. 227–236, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[17] J. Limeira, L. Agullo, and M. Etxeberria, “Dredged Marine Sand in Concrete: An Experimental Section of a Harbor Pavement,” Construction and Building Materials, vol. 24, pp. 863–870, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[18] N. P. Ratnayake et al., “Evaluation of the Potential of Seashore Sand as an Alternative to River Sand for Concrete Production In Sri Lanka,” Journal of Geological Society of Sri Lanka, vol. 16, pp. 109–117, 2014.
[Google Scholar] [Publisher Link]
[19] Kartheek Thunga, and T. Venkat Das, “An Experimental Investigation on Concrete with Replacement of Treated Sea Sand as Fine Aggregate,” Materials Today: Proceedings, vol. 27, no. 2, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Praveen Nagulu.S, Ayyan Raj. A, and Deepan Chakravarthi. A.V., “Evaluation of Workability and Strength of Fly Ash Based Solid Block using M-Sand as Replacement of Fine Aggregate,” International Journal of Recent Engineering Science, vol. 7, no. 3, pp. 19-24, 2020.
[CrossRef] [Publisher Link]
[21] D. A. R. Dolage, M. G. S. Dias, and C. T. Ariyawansa, “Offshore Sand as a Fine Aggregate for Concrete Production,” Current Journal of Applied Science and Technology, vol. 3, no. 4, pp. 813–825, 2013.
[CrossRef] [Publisher Link]
[22] M. Karthikeyan and V. Nagarajan, “Chloride Analysis of Sea Sand for Making Concrete,” National Academy Science Letters, vol. 40, no. 1, pp. 29–31, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[23] Yijie Huang et al., “Mechanical Properties of Sea Sand Recycled Aggregate Concrete Under Axial Compression,” Construction and Building Materials, vol. 175, pp. 55–63, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[24] G. Ganesh Prabhu et al., “Mechanical and Durability Properties of Concrete Made with Used Foundry Sand as Fine Aggregate,” Advances in Building Technologies and Construction Materials, vol. 2015, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[25] Priya Gajjal, and M R Dahake, “A Novel Optimal Solution for Utilizing Plastic Waste for Making Construction Material,” International Journal of Engineering Trends and Technology, vol. 70, no. 9, pp. 93-104, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[26] R. Siddique et al., “Strength, Durability, and Micro-Structural Properties of Concrete Made with Used-Foundry Sand (UFS),” Construction and Building Materials, vol. 25, no. 4, pp. 1916–1925, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[27] Pedro Amorim, Jorge de Brito, and Luís Evangelista, “Concrete Made with Coarse Concrete Aggregate: Influence of Curing on Durability,” ACI Materials Journal, vol. 109, no. 2, pp. 195–204, 2012.
[Google Scholar] [Publisher Link]
[28] 26 Nigarila. R, Rajalakshmi. N, and Deepan Chakravarthi A.V., “Strength and Durability of Concrete Block by Partial Replacement of Cement with Granite Dust and Fine Aggregate with M-Sand,” International Journal of Recent Engineering Science, vol. 7, no. 3, pp. 12-18, 2020.
[CrossRef] [Publisher Link]
[29] P Castro, M.A Sanjuán, and J Genescá, “Carbonation of concrete in Mexico Gulf,” Building and Environment, vol. 35, pp. 145–149, 2000.
[CrossRef] [Google Scholar] [Publisher Link]