A Design of Biomeditronics Analysis Bed Parameter using Atmega 16 Microcontroller

International Journal of Electronics and Communication Engineering

© 2016 by SSRG - IJECE Journal

Volume 3 Issue 8

Year of Publication : 2016

Authors : Sachin Chauhan, Shivam Sawarn, Shubham Sawarn, Sagar Raj and Udaybhan Chaudhary

10.14445/23488549/IJECE-V3I8P101

How to Cite?

Sachin Chauhan, Shivam Sawarn, Shubham Sawarn, Sagar Raj and Udaybhan Chaudhary, "A Design of Biomeditronics Analysis Bed Parameter using Atmega 16 Microcontroller," SSRG International Journal of Electronics and Communication Engineering, vol. 3,  no. 8, pp. 1-5, 2016. Crossref, https://doi.org/10.14445/23488549/IJECE-V3I8P101

Abstract:

Biomedical field does not have anyboundation as the technology is developing and the patients are increasing day by day. After working in the practical exposure with the surroundings, we found that sensors are very valuable.It is reasonable at both the ends. It has proved its need till now and is showing its abilities incessantly. This technology has the ability to shape the future of biomedical. The main aim of paper is to understand the technology better on the practical basis. It perfectly helps an engineer to get an overlook of society. We get technical exposure to every old and new instrument and technical advances. A step-by-step approach in designing the Atmega-16 microcontroller based system for measurement and control of the essential parameters. The results obtained from the measurement have shown that the system performance is quite illusive and accurate. The system has successfully overcome quite a few disadvantages of the existing systems by minimizing the power consumption, maintenance and complexity, at the same time providing a complete form of fulfillment to the health trades. The continuously decreasing costs of hardware and software, create a wider acceptance of electronic systems in different fields, and an emerging control system industry in several areas of inclusive production, will result in reliable control systems that will address several aspects of variable qualities of production. Further corrections will be made as quite reliable and primitively expensive and more useful as sensors are developed for use in medical science .Although the enhancements mentioned in the paper may seem far in the future, the required technology and components are present, many such sensors have been independently developed, or are at least tested at a prototype level. Also, differentiation of all these technologies is not a big task and can also be successfully carried out.

Keywords:

Biomedical, sensors, load sensor, temperature sensor, heart-beat sensor.

References:

[1] Van Bemmel, J., and Musen, M., 1997, “Handbook of medical informatics”, 2nd Edition, Houten/Diagem: Springer.
[2] Gardner, R. M. ., and Shabot, M. M., 2006, Patient-Monitoring Systems, Biomedical Informatics, 3rd Edition Computer Applications in Health Care and Biomedicine, Springer New York.
[3] Camm, A.J., et al., 1996, “Heart rate variability: Standards of measurement, physiological interpretation, and clinical,” European Heart Journal, 17, 354-381.
[4] Sheida N., 2005, “2D Channel Identification, Equalization and Detection for Holographic Data Storage Systems,” M.S. Project Report, Carnegie Mellon University.
[5] Trägårdh, E., et al., 2007, “Reduced high-frequency QRS components in electrocardiogram leads facing an area of the heart with intraventricular conduction delay due to bundle branch block,” Journal of Electrocardiology, 40(2), 127-132.
[6] Yang, J., et al., 2009, “A New Filtering Algorithm for Removing Salt-and-Pepper Noise,” International Conference on Environmental Science and Information Application Technology, 1, 355-358.
[7] M. A. Hasan, et al., 2009, “Detection and Processing Techniques of FECG Signal for Fetal Monitoring”, Biological Procedures Online, 33 pages.