Modelling of Optimized Conformal Antenna Array for Airborne Applications

International Journal of Electronics and Communication Engineering

© 2024 by SSRG - IJECE Journal

Volume 11 Issue 8

Year of Publication : 2024

Authors : B. R. Pushpa, P. V. Pushpa, Devaraju Ramakrishna

10.14445/23488549/IJECE-V11I8P122

How to Cite?

B. R. Pushpa, P. V. Pushpa, Devaraju Ramakrishna, "Modelling of Optimized Conformal Antenna Array for Airborne Applications," SSRG International Journal of Electronics and Communication Engineering, vol. 11,  no. 8, pp. 218-226, 2024. Crossref, https://doi.org/10.14445/23488549/IJECE-V11I8P122

Abstract:

The design and synthesis of conformal array antennas that are optimized in terms of gain, VSWR, efficiency and other antenna performance parameters, specifically for airborne applications, has been a challenging task for scientists and researchers. In this paper, a novel approach to the design, simulation and fabrication of a 1x4 microstrip patch antenna array with two Wilkinson 3-dB power dividers on FR-4 substrate is presented. The resonance frequencies chosen are 3.6 GHz for uplink and 3.4 GHz for downlink in the n78 band of 5G NR (New Radio) communication in India. The 1x4 array is designed to be simulated, and synthesis results are obtained for planar and curved surfaces to achieve conformability. The different curvatures implemented are circular-bend and U-shaped bends for the fabricated antenna array. This high degree of flexibility for testing purposes and excellent dimensional stability is offered by the dielectric material FR-4 laminate 6150/6150C. The inset feeding technique is used to feed power to the antenna array, which is not only simple but also offers good impedance matching between the terminals. The software tool used for simulation is CST (Computer Simulation Technology) Studio Suite. The proposed antenna array gives a phenomenal gain of 13.6 dB (for both uplink and downlink frequencies), HPBW of 75.9° and SLL of -11.5dB, all of which are the optimum values obtained from its previous counterparts (single patch and 1x2 array designed and simulated for the same frequencies. These results have also been found to be better than those of any contemporary designs and variants. The proposed array finds applications in drones, military spacecrafts, point-to-point communication links (because of narrow bandwidth) and air traffic control and management systems.

Keywords:

Airborne, Conformal antennas, Downlink, fabrication, Substrate.

References:

[1] Mamta Agiwal, Abhishek Roy, and Navrati Saxena, “Next Generation 5G Wireless Networks: A Comprehensive Survey,” IEEE Communications Surveys & Tutorials, vol. 18, no. 3, pp. 1617-1655, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Weijia Wang et al., “High-Performance Printable 2.4 GHz Graphene-Based Antenna Using Water-Transferring Technology,” Science and Technology of Advanced Materials, vol. 20, no. 1, pp. 870-875, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Lars Josefsson, and Patrik Persson, Conformal Array Antenna Theory and Design, Wiley-IEEE Press, pp. 1-512, 2006.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Yuhe Liu et al., “Cylindrical Conformal Broadband Array Antenna Based on Defective Ground Structure,” 2019 IEEE 4th Advanced Information Technology, Electronic and Automation Control Conference, Chengdu, China, pp. 382-385, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Nevin Altunyurt et al., “Conformal Antennas on Liquid Crystalline Polymer Based Rigid-Flex Substrates Integrated with the Front-End Module,” IEEE Transactions on Advanced Packaging, vol. 32, no. 4, pp. 797-808, 2009.
[CrossRef] [Google Scholar] [Publisher Link]
[6] J. Suganthi, T. Kavitha, and V. Ravindra, “Survey on Metamaterial Antennas,” International Conference on Recent Innovations in Engineering and Technology, Tamil Nadu, India, vol. 1070, pp. 1-14, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[7] J. Monica, and P. Jothilakshmi, “A Design of Bandwidth-Enhanced Conformal Antenna for Aircraft Applications,” IETE Journal of Research, vol. 69, no. 1, pp. 447-459, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Wei Hong et al., “Multibeam Antenna Technologies for 5G Wireless Communications,” IEEE Transactions on Antennas and Propagation, vol. 65, no. 12, pp. 6231-6249, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Syeda Fizzah Jilani et al., “Millimeter-Wave Liquid Crystal Polymer Based Conformal Antenna Array for 5G Applications,” IEEE Antennas and Wireless Propagation Letters, vol. 18, no. 1, pp. 84-88, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Chun-Xu Mao et al., “Planar Sub-Millimeter-Wave Array Antenna with Enhanced Gain and Reduced Sidelobes for 5G Broadcast Applications,” IEEE Transactions on Antennas and Propagation, vol. 67, no. 1, pp. 160-168, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[11] Wei Lin, Richard W. Ziolkowski, and Hang Wong, “Pattern Reconfigurable Techniques for LP and CP Antennas with the Broadside and Conical Beams,” 12th European Conference on Antennas and Propagation, London, UK, pp. 1-4, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Wael Ali et al., “Planar Dual-Band 27/39 GHz Millimeter-Wave MIMO Antenna for 5G Applications,” Microsystem Technologies, vol. 27, pp. 283-292, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[13] T.E. Morton, and K.M. Pasala, “Pattern Synthesis of Conformal Arrays for Airborne Vehicles,” 2004 IEEE Aerospace Conference Proceedings (IEEE Cat. No.04TH8720), Big Sky, MT, USA, vol. 2, pp. 1030-1039, 2004.
[CrossRef] [Google Scholar] [Publisher Link]
[14] Jiazhi Dong et al., “A Research on Airborne Conformal Array with High Gain and Low SLL,” 2014 International Conference on Computational Intelligence and Communication Networks, Bhopal, India, pp. 334-338, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[15] Yeqin Huang, and S.T. Hsieh, “Radiation of Conformal Slot Arrays on Perfectly Conducting Super-Spheroid,” 2005 IEEE International Symposium on Microwave, Antenna, Propagation and EMC Technologies for Wireless Communications, Beijing, vol. 1, pp. 601-604, 2005.
[CrossRef] [Google Scholar] [Publisher Link]
[16] L. Zou, J. Lasenby, and Z. He, “Beamforming with Distortionless Co-Polarisation for Conformal Arrays Based on Geometric Algebra,” IET Radar, Sonar and Navigation, vol. 5, no. 8, pp. 842-853, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[17] K.M. Tsui, and S.C. Chan, “Pattern Synthesis of Narrowband Conformal Arrays Using Iterative Second-Order Cone Programming,” IEEE Transactions on Antennas and Propagation, vol. 58, no. 6, pp. 1959-1970, 2010.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Yan-Ying Bai et al., “A Hybrid IWO/PSO Algorithm for Pattern Synthesis of Conformal Phased Arrays,” IEEE Transactions on Antennas and Propagation, vol. 61, no. 4, pp. 2328-2332, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[19] Massimiliano Comisso, and Roberto Vescovo, “3D Power Synthesis with Reduction of Near-Field and Dynamic Range Ratio for Conformal Antenna Arrays,” IEEE Transactions on Antennas and Propagation, vol. 59, no. 4, pp. 1164-1174, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Srabonty Soily, Rezaul Karim Mazumder, and Khaleda Ali, “Design and Simulation of Two Conformal Arrays with Dual Patch and Quadruple Patch Antenna Elements,” 2015 IEEE Conference on Antenna Measurements & Applications, Chiang Mai, Thailand, pp. 1-3, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[21] M. Comisso, and R. Vescovo, “Fast 3D Pattern Synthesis for Conformal Antenna Arrays with Cross-Polarization Reduction,” 2010 IEEE Antennas and Propagation Society International Symposium, Toronto, ON, Canada, pp. 1-4, 2010.
[CrossRef] [Google Scholar] [Publisher Link]
[22] Meysam Rasekh, and Saeid R. Seydnejad, “Design of an Adaptive Wideband Beamforming Algorithm for Conformal Arrays,” IEEE Communications Letters, vol. 18, no. 11, pp. 1955-1958, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[23] K. Woelder, and J. Granholm, “Cross-Polarization and Sidelobe Suppression in Dual Linear Polarization Antenna Arrays,” IEEE Transactions on Antennas and Propagation, vol. 45, no. 12, pp. 1727-1740, 1997.
[CrossRef] [Google Scholar] [Publisher Link]
[24] H. Schippers et al., “Conformal Phased Array with Beam Forming for Airborne Satellite Communication,” 2008 International ITG Workshop on Smart Antennas, Darmstadt, Germany, pp. 343-350, 2008.
[CrossRef] [Google Scholar] [Publisher Link]
[25] Peter Knott, “Design of a Triple Patch Antenna Element for Double Curved Conformal Antenna Arrays,” 2006 First European Conference on Antennas and Propagation, Nice, France, pp. 1-4, 2006.
[CrossRef] [Google Scholar] [Publisher Link]
[26] Ziheng Ding et al., “High Aperture Efficiency Arced Conformal Array with Phasor Beam Steering Antenna,” IEEE Transactions on Antennas and Propagation, vol. 71, no. 1, pp. 596-605, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[27] Fujun Xu et al., “Performance and Impact Damage of a Three Dimensionally Integrated Microstrip Feeding Antenna Structure,” Composite Structures, vol. 93, no. 1, pp. 193-197, 2010.
[CrossRef] [Google Scholar] [Publisher Link]
[28] Lan Yao et al., “Fabrication and Impact Performance of Three-Dimensionally Integrated Microstrip Antennas with Microstrip and Coaxial Feeding,” Smart Materials and Structures, vol. 18, no. 9, 2009.
[CrossRef] [Google Scholar] [Publisher Link]
[29] Brajlata Chauhan et al., “Cylindrical Conformal Antenna Arrays Theory for Military Aircraft Antenna,” 2020 IEEE International Conference on Computing, Power and Communication Technologies, Greater Noida, India, pp. 77-82, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[30] Bahare Mohamadzade et al., “Recent Developments and State of the Art in Flexible and Conformal Reconfigurable Antennas,” Electronics, vol. 9, no. 9, pp. 1-26, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[31] G. Shine Let et al., “Split Ring Resonator-Based Conformal Antenna for Earth Coverage Spaceborne Applications,” Computer Aided Constellation Management and Communication Satellites Lecture Notes in Electrical Engineering, vol. 987, pp. 9-16, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[32] Neng-Wu Liu et al., “A Low-Profile Aperture-Coupled Microstrip Antenna with Enhanced Bandwidth under Dual Resonance,” IEEE Transactions on Antennas and Propagation, vol. 65, no. 3, pp. 1055-1062, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[33] Ling Sun et al., “Two-Port Pattern Diversity Antenna for 3G and 4G MIMO Indoor Applications,” IEEE Antennas and Wireless Propagation Letters, vol. 13, pp. 1573-1576, 2014.
[CrossRef] [Google Scholar] [Publisher Link]