Design the Fuzzy Controller Tuning PID Controller Parameter for Wind Generator System

International Journal of Electrical and Electronics Engineering

© 2018 by SSRG - IJEEE Journal

Volume 5 Issue 4

Year of Publication : 2018

Authors : Dang Danh Hoang, Tran Xuan Minh and Tran Xuan Dung

10.14445/23488379/IJEEE-V5I4P102

How to Cite?

Dang Danh Hoang, Tran Xuan Minh and Tran Xuan Dung, "Design the Fuzzy Controller Tuning PID Controller Parameter for Wind Generator System," SSRG International Journal of Electrical and Electronics Engineering, vol. 5,  no. 4, pp. 9-15, 2018. Crossref, https://doi.org/10.14445/23488379/IJEEE-V5I4P102

Abstract:

Wind energy power systems are increasingly being used to harness the vast amount of renewable energy that nature offers to people, such as wind power. In this system, the use of a wind generator is a three-phase asynchronous power generator. In order to improve the quality of control it is necessary to have suitable controllers to ensure that the working conditions of the system such as the grid, power output as well as the required reactive power (within the allowable range of the system). This article presents the method of designing a fuzzy controller that defines a PID controller parameter to improve quality compared to classic PID controllers. The simulated results show that the quality of the system has been ensured in the synchronous modes and when the active and reactive power are changed by requirement of the load (within the allowable range).

Keywords:

Wind power; PID; Fuzzy; Fuzzy-tuning PID parameters; cling to power.

References:

[1] Andreas Persson, “Analysis, Modeling and Control of Doubly-Fed Induction Generators for Wind Turbines”, Thesis for the degree of doctor of philosophy, Division of Electric Power Engineering Department of Energy and Environment, chalmers university of technology, G¨oteborg, Sweden, 2005 
[2] Nguyen Doan Phuoc, Linear control theory, Scince and Technics Publishing House, Ha Noi, 2002. 
[3] Nguyen Doan Phuoc Phan Xuan Minh, Fuzzy control theory3rd edition, Scince and Technics Publishing House, Ha Noi, 2002. 
[4] Nguyen Phung Quang, Andreas Dittrich, Intelligent electric drives, Scince and Technics Publishing House, Ha Noi, 2002. 
[5] Nguyen Phung Quang, Doubly-fed induction machine as generator in Wind Power Generation: Adjustment algorithms ensure the separation between torque and power factor, The 3rd Vietnam Conference on Automation (3rd VICA), 1998, pp. 413-437. 
[6] Dang Danh Hoang, Improving control quality of doubly-fed induction generators in wind power plants by a nonlinear control method, Ph.D, University of Technology – Thai Nguyen University, 2013.