Soft-Switching HBC for Multiple E-Source Vehicles

International Journal of Electrical and Electronics Engineering

© 2018 by SSRG - IJEEE Journal

Volume 5 Issue 7

Year of Publication : 2018

Authors : Veeresh H, Ashok Kusagur

10.14445/23488379/IJEEE-V5I7P104

How to Cite?

Veeresh H, Ashok Kusagur, "Soft-Switching HBC for Multiple E-Source Vehicles," SSRG International Journal of Electrical and Electronics Engineering, vol. 5,  no. 7, pp. 16-21, 2018. Crossref, https://doi.org/10.14445/23488379/IJEEE-V5I7P104

Abstract:

A soft- switching half bridge dc-dc converter (HBC) suitable for electrical vehicles is designed and proposed in this paper. The minimum number of power switching devices are used designed the HBC. The proposed HCB resonant circuit has only two Zero Current power switching (ZCS) devices at primary side and four Zero Voltage power switching (ZVS) devices at secondary side of high frequency transformer, with operating switching frequency of 100kHz and input multiple source are maintained constant, and varied the PWM modulation of power switching devices, due to reduced switching losses, stress, increasing frequency, improved efficiency and performance, The proposed module is designed and simulated results are analyzed using MATLab 2009a.

Keywords:

HBC, ZCS, ZVS,MATLab.

References:

[1] Veeresh H, Ashok Kusagur “Novel advanced switching technique ZCS/ZVS fed bidirectional DC-DC topology to EVs”DOI: 10.1109/SCOPES.2016.7955512, IEEE. Conf. pp.613 -617, 2016. 
[2] Akshay K. Rathore, Prasanna U R, “Analysis, Design, and Experimental Results of Novel Snubberless Bidirectional Naturally Clamped ZCS/ZVS Current-Fed Half-Bridge DC/DC Converter for Fuel Cell Vehicles” IEEE Trans.Ind.Electron, vol. 60, no. 10, pp.4482-4491.Oct. 2013. 
[3] Veeresh H, Ashok Kusagur “Comparative analysis of DC-DC converter topologies with soft-Switching techniques” DOI: 10.1109/ICEECCOT.2016.7955195, IEEE.Conf.pp.106 -110, 2016. 
[4] Veeresh H, Ashok Kusagur "Design and Development of Push-Pull DC-DC Converter by ZCS/ZVS to Electrical Vehicle Applications (EVs)", at SNJB's (4thICRTET'2015), joint McGraw Hill Education & IJMTER Held on 2nd to 4th July 2015. 
[5] Veeresh H, Ashok Kusagur “Simulation of a ZCS/ZVS Push –Pull DC/DC Converter” published in AES Journal in Engg., Tech., & Management, Page No.431,volume 03, Issue –02, Nov-14 to Oct -15 Year 2015. ISSN: 0975-6736. 
[6] Veeresh H Ashok Kusagur “ZCS/ZVS Push –Pull DC/DC Converter” published in IJLTEMAS, pp.no. 80-83, volume-IV, Issue –01, Jan-15.ISSN: 2278-2540.. 
[7] Veeresh H, Ashok Kusagur “ Soft-Switching fed with Isolated FBC for Hybrid E-V’s” IAETSD-JARAS Jour.vol.4,Issue-6,pp.148-155,Nov.2017. [8] Udupi R. Prasanna, Akshay K. Rathore, and Sudip K. Mazumder, “Novel Zero-Current-Switching Current-Fed Half-Bridge Isolated DC/DC Converter for Fuel-Cell-Based Applications” IEEE Trans. Ind. Appli., vol. 49, no. 4,pp. 1658-1668. July/Aug- 2013. 
[9] Udupi R. Prasanna, Member, IEEE, and Akshay K. Rathore “Analysis, Design, and Experimental Results of a Novel Soft-Switching Snubberless Current-Fed Half-Bridge Front-End Converter-Based PV Inverter” IEEE Trans. Power Electron., vol. 28, no. 7,pp. 3219-3230- July 2013. 
[10] Veeresh H, Ashok Kusagur “ Soft-Switching fed with Isolated FBC for Hybrid E-V’s” IAETSD-JARAS Jour.vol.4,Issue-6,pp.148-155.