Modeling of Energy Generation Using Piezoelectric Material for Wearable Devices
| International Journal of Electrical and Electronics Engineering |
| © 2023 by SSRG - IJEEE Journal |
| Volume 10 Issue 9 |
| Year of Publication : 2023 |
| Authors : S. Muthukaruppasamy, P. Geetha, V. Rajagopal, P. Duraipandy |
10.14445/23488379/IJEEE-V10I9P110
How to Cite?
S. Muthukaruppasamy, P. Geetha, V. Rajagopal, P. Duraipandy, "Modeling of Energy Generation Using Piezoelectric Material for Wearable Devices," SSRG International Journal of Electrical and Electronics Engineering, vol. 10, no. 9, pp. 102-111, 2023. Crossref, https://doi.org/10.14445/23488379/IJEEE-V10I9P110
Abstract:
Piezoceramics hold the most significant market share among piezoelectric materials in the device sector. In addition to being employed for picture stabilization, they are also used in robotics, mechanics, and medicine. This substance is controlled and responds well to mechanical and electrical stimuli. Micro Electrical Mechanical Systems (MEMS), which have distinct qualities and a small size that enables them to be incorporated into nearly any product on the market, are currently being developed. Energy-collecting system research and development can benefit from simulation. In this study, a piezoelectric material is created and used to make shoes and other types of footwear. When put under pressure, the piezo material may become stressed, and the mechanical energy is transformed into electrical power. Using transducers, we can store energy that soldiers can use while conducting operations in the forest. An ideal geometry has been presented and studied using the analysis of a finite element geometry based on the electric response as a function of mechanical deformation. More technologies will have the possibility to profit from energy gathering as these devices’ efficiency keeps increasing.
Keywords:
Electric displacement, Electric potential, Finite Element Method, Lead zirconate titanate, Piezoelectric energy.
References:
[1] Haonan Jin et al., “Review on Piezoelectric Actuators Based on High-Performance Piezoelectric Materials,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 69, no. 11, pp. 3057-3069, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Jian Qiu et al., “2D Organic-Inorganic Perovskite (ATHP)2PbI4 with Huge Out-of-Plane Piezoelectric Properties,” IEEE Electron Device Letters, vol. 44, no. 6, pp. 987-990, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[3] K. Suresh, and E. Parimalasundar, “ITBC Controlled IPWM for Solar Based Wide Range Voltage Conversion System,” IETE Journal of Research, pp. 1-9, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Sindhuja R. et al., “A Reconfigurable Multilevel Inverters with Minimal Switches for Battery Charging and Renewable Energy Applications,” 2022 6th International Conference on Electronics, Communication and Aerospace Technology, Coimbatore, India, pp. 422- 427, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Huabin Yang et al., “Lead-Free BF-BT Ceramics with Ultrahigh Curie Temperature for Piezoelectric Accelerometer,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 69, no. 11, pp. 3102-3107, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[6] E. Parimalasundar et al., “Investigation of Efficient Multilevel Inverter for Photovoltaic Energy System and Electric Vehicle Applications,” Electrical Engineering & Electromechanics, no. 4, pp. 47-51, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[7] Krishnan Suresh, and Ezhilvannan Parimalasundar, “Design and Implementation of Dual-Leg Generic Converter for DC/AC Grid Integration,” International Journal of Circuit Theory and Applications, vol. 51, no. 8, pp. 3865-3879, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Xiaotian Li et al., “A New Method for Evaluation of the Complex Material Coefficients of Piezoelectric Ceramics in the Radial Vibration Modes,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 68, no. 11, pp. 3446-3460, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Syed T. Haider et al., “A Review of the Recent Applications of Aluminum Nitride-Based Piezoelectric Devices,” IEEE Access, vol. 11, pp. 58779-58795, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Parimalasundar Ezhilvannan, and Suresh Krishnan, “Fault Analysis and Compensation in a Five Level Multilevel DC-AC Converter,” El-Cezeri, vol. 10, no. 1, pp. 99-108, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[11] Suresh K. et al., “Encapsulated 3Ø Converter for Power Loss Minimization in a Grid-Connected System,” Automatika Journal for Control, Measurement, Electronics, Computing and Communications, vol. 64, no. 1, pp. 189-197, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Jessica D. Boles et al., “Evaluating Piezoelectric Materials and Vibration Modes for Power Conversion,” IEEE Transactions on Power Electronics, vol. 37, no. 3, pp. 3374-3390, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[13] Limna S. Attoor, and Mahmoud Al Ahmad, “Piezoelectric Coefficient Characterization Using Combined Electrical and Light-Based Methodology,” IEEE Access, vol. 11, pp. 74671-74675, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[14] K. Suresh et al., “Design and Implementation Bidirectional DC-AC Converter for Energy Storage System,” IEEE Canadian Journal of Electrical and Computer Engineering, vol. 46, no. 2, pp. 130-136, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[15] K. Suresh, and E. Parimalasundar, “Fault Analysis and Clearance in FL-APC DC–AC Converter,” IEEE Canadian Journal of Electrical and Computer Engineering, vol. 46, no. 1, pp. 1-6, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[16] Parimalasundar Ezhilvannan et al., “Analysis of the Effectiveness of a Two-Stage Three-Phase Grid Connected Inverter for Photovoltaic Applications,” Journal of Solar Energy Research, vol. 8, no. 2, pp. 1471-1483, 2023.
[Google Scholar] [Publisher Link]
[17] Zhong Li et al., “Outstanding Piezoelectric Sensitivity of Poly (Vinylidene-Trifluoroethylene) for Acceleration Sensor Application,” IEEE Transactions on Dielectrics and Electrical Insulation, vol. 29, no. 3, pp. 808-814, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Jan-Willem Burssens, Appo Van Der Wiel, and Michael Kraft, “Dual-Ring Method: Lateral Piezoelectric Coefficient (e31,f) Measurement on Unstructured Thin Films,” IEEE Transactions on Instrumentation and Measurement, vol. 72, pp. 1-12, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[19] E. Parimalasundar et al., “Efficient Integration of Photovoltaic Cells with Multiport Converter for Enhanced Energy Harvesting,” 2023 5 th International Conference on Inventive Research in Computing Applications (ICIRCA), Coimbatore, India, pp. 1590-1595, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Abhinav V. Deshpande, “Energy Harvesting from Piezoelectric Material Using Human Motion,” SSRG International Journal of VLSI & Signal Processing, vol. 6, no. 2, pp. 5-8, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[21] B. Perumal, K. Suresh, and E. Parimalasundar, “Fault Analysis in the 5-Level Multilevel NCA DC–AC Converter,” Automatika Journal for Control, Measurement, Electronics, Computing and Communications, vol. 64, no. 3, pp. 606-612, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[22] Massimo Mariello et al., “Microstructure and Electrical Properties of Novel Piezo-Optrodes Based on Thin-Film Piezoelectric Aluminium Nitride for Sensing,” IEEE Transactions on Nanotechnology, vol. 20, pp. 10-19, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[23] Valentin Breton et al., “A New Isolated Topology of DC-DC Converter Based on Piezoelectric Resonators,” IEEE Transactions on Power Electronics, vol. 38, no. 8, pp. 10012-10025, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[24] Thomas Schlinquer et al., “Design of Piezoelectric Actuators by Optimizing the Electrodes Topology,” IEEE Robotics and Automation Letters, vol. 6, no. 1, pp. 72-79, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[25] Hyeonjung Lim et al., “Thin Piezoelectric Mobile Robot Using Curved Tail Oscillation,” IEEE Access, vol. 9, pp. 145477-145485, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[26] Jessica D. Boles et al., “A Piezoelectric-Resonator-Based DC-DC Converter Demonstrating 1 kW/cm Resonator Power Density,” IEEE Transactions on Power Electronics, vol. 38, no. 3, pp. 2811-2815, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[27] Arpit Bhatt et al., “Electricity Generation through Piezoelectric Material in Automobile,” SSRG International Journal of Mechanical Engineering, vol. 4, no. 1, pp. 14-17, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[28] Nitheesh M. Nair, Swati Deswal, and Ravinder Dahiya, “Transparent Piezoelectric Nanogenerator for Self-Powered Force Sensing Applications,” IEEE Sensors Letters, vol. 7, no. 5, pp. 1-4, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[29] Shuai Ju, Haifeng Zhang, and Jiashi Yang, “Effects of Semiconduction on Thickness-Extensional Modes of Piezoelectric Resonators,” IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 69, no. 2, pp. 911-912, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[30] Sindhuja R. et al., “Comparison between Symmetrical and Asymmetrical 13 Level MLI with Minimal Switches,” 2022 International Conference on Automation, Computing and Renewable Systems (ICACRS), Pudukkottai, India, pp. 187-191, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[31] E. Parimalasundar et al., “Performance Analysis of DC-DC Converter for Electric Vehicle Charging Applications,” 2023 7th International Conference on Computing Methodologies and Communication (ICCMC), Erode, India, pp. 1543-1546, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[32] Syed Mamun R. Rasid, Aron Michael, and Hemanshu Roy Pota, “On-Chip Self-Sensing Piezoelectric Micro-Lens Actuator with Feedback Control,” IEEE Sensors Journal, vol. 23, no. 10, pp. 10275-10284, 2023.
[CrossRef] [Google Scholar] [Publisher Link]