Photovoltaic Power Plant Performance Improvement with Electric Vehicle Integration: Integrated Control Strategies

International Journal of Electrical and Electronics Engineering

© 2024 by SSRG - IJEEE Journal

Volume 11 Issue 4

Year of Publication : 2024

Authors : Basaralu Nagasiddalingaiah Harish, Usha Surendra

10.14445/23488379/IJEEE-V11I4P109

How to Cite?

Basaralu Nagasiddalingaiah Harish, Usha Surendra, "Photovoltaic Power Plant Performance Improvement with Electric Vehicle Integration: Integrated Control Strategies," SSRG International Journal of Electrical and Electronics Engineering, vol. 11,  no. 4, pp. 72-86, 2024. Crossref, https://doi.org/10.14445/23488379/IJEEE-V11I4P109

Abstract:

The combination of Photovoltaic (PV) systems and Electric Vehicles (EVs) holds enormous promise in an era characterized by growing environmental consciousness and sustainable energy solutions. PV technology is a clean, sustainable energy source that produces electricity by utilizing solar energy. Concurrently, EVs’ electrification of transportation is a critical step in the direction of lower greenhouse gas emissions and more energy efficiency. Through the use of advanced control systems, this research aims to push the boundaries of current practice in the area of PV and EV integration. Specifically, it focuses on the Icosφ controller and dq controller to regulate voltage, minimize Total Harmonic Distortion (THD), and facilitate bi-directional power flow. A thorough Simulink model is created, simulating a complicated PV-EV-grid system, in order to evaluate the effectiveness of different control mechanisms. This model accommodates the unique characteristics of Plug-in Hybrid Electric Vehicles (PHEVs) and enables a detailed assessment of the percentages of voltage and current THD under different operating situations. It can handle both linear and non-linear loads. Most importantly, the study’s findings showthattheTHD values meet the strict requirements outlined in IEEE519, highlighting the efficiency of the integrated control approaches. The research not only contributes to the advancement of PV and EV technologies but also paves the way for grid-compatible, high-quality power distribution. This endeavor facilitates sustainable energy integration while simultaneously reducing the environmental footprint, making substantial strides toward a greener and more energy-efficient future.

Keywords:

Photovoltaic (PV), Electric Vehicles (EVs), Control strategies, Total Harmonic Distortion (THD), Icos φ controller.

References:

[1] International Energy Agency, Global EV Outlook, 2021. [Online]. Available: https://www.iea.org/reports/global-ev-outlook-2021
[2] Solar PV Power Capacity in the Net Zero Scenario 2010-2030, 2010. [Online]. Available: https://www.iea.org/data-and-statistics/charts/solar-pv-power-capacity-in-the-net-zero-scenario-2010-2030
[3] L. Cheng, Y. Chang, and R. Huang, “Corrections to Mitigating Voltage Problem in Distribution System With Distributed Solar Generation Using Electric Vehicles [Oct 15 1475-1484],” IEEE Transactions on Sustainable Energy, vol. 7, no. 2, pp. 608-608, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Anjeet Verma, and Bhim Singh, “Bi-Directional Charger for Electric Vehicle with Four Quadrant Capabilities,” 2016 IEEE 7th Power India International Conference (PIICON), Bikaner, India, pp. 1-6, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Justin M. Foster et al., “Plug-In Electric Vehicle and Voltage Support for Distributed Solar: Theory and Application,” IEEE Systems Journal, vol. 7, no. 4, pp. 881-888, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[6] Giuseppe Buja, Manuele Bertoluzzo, and Christian Fontana, “Reactive Power Compensation Capabilities of V2G-Enabled Electric Vehicles,” IEEE Transactions on Power Electronics, vol. 32, no. 12, pp. 9447-9459, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[7] Morris Brenna, Federica Foiadelli, and Michela Longo, “The Exploitation of Vehicle-to- Grid Function for Power Quality Improvement in a Smart Grid,” IEEE Transactions on Intelligent Transportation Systems, vol. 15, no. 5, pp. 2169-2177, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Van-Linh Nguyen et al., “Charging Strategies to Minimize the Energy Cost for An Electric Vehicle Fleet,” IEEE PES Innovative Smart Grid Technologies, Europe, Istanbul, Turkey, pp. 1-7, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Pablo Garcia-Trivino et al., “Control and Operation of Power Sources in a Medium-Voltage Directcurrent Microgrid for an Electric Vehicle Fast Charging Station with a Photovoltaic and a Battery Energy Storage System,” Energy, vol. 115, pp. 38-48, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Ahmad Hamidi, Luke Weber, and Adel Nasiri, “EV Charging Station Integrating Renewable Energy and Second-Life Battery,” 2013 International Conference on Renewable Energy Research and Applications (ICRERA), Spain, pp. 1217-1221, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[11] Longcheng Tan et al., “Comprehensive DC Power Balance Management in High-Power Three-Level DC-DC Converter for Electric Vehicle Fast Charging,” IEEE Transactions on Power Electronics, vol. 31, no. 1, pp. 89-100, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Longcheng Tan et al., “Effective Voltage Balance Control for Bipolar-DC-Bus-Fed EV Charging Station with Three- Level DC-DC Fast Charger,” IEEE Transactions on Industrial Electronics, vol. 63, no. 7, pp. 4031-4041.
[CrossRef] [Google Scholar] [Publisher Link]
[13] Longcheng Tan, Ning Zhu, and Bin Wu, “An Integrated Inductor for Eliminating Circulating Current of Parallel Three-Level DC-DC Converter-Based EV Fast Charger,” IEEE Transactions on Industrial Electronics, vol. 63, no. 3, pp. 1362-1371, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[14] Sebastian Rivera, and Bin Wu, “Electric Vehicle Charging Station with an Energy Storage Stage for Split-DC Bus Voltage Balancing,” IEEE Transactions on Power Electronics, vol. 32, no. 3, pp. 2376-2386, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[15] Srinivas Bhaskar Karanki et al., “A DSTATCOM Topology with Reduced DC- Link Voltage Rating for Load Compensation with NonStiff Source,” IEEE Transactions on Power Electronics, vol. 27, no. 3, pp. 1201-1211, 2012.
[CrossRef] [Google Scholar] [Publisher Link]
[16] Sunil Kumar, and Bhim Singh, “Control of 4-Leg VSC Based DSTATCOM Using Modified Instantaneous Symmetrical Component Theory,” 2009 International Conference on Power Systems, Kharagpur, India, pp. 1-6, 2009.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Tejas Zaveri, Bhavesh Bhalja, and Naimish Zaveri, “Comparison of Control Strategies for DSTATCOM in Three- Phase, Four- Wire Distribution System for Power Quality Improvement under Various Source Voltage and Load Conditions,” International Journal of Electrical Power & Energy Systems, vol. 43, no. 1, pp. 582-594, 2012.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Muhammad Ammirrul Atiqi Mohd Zainuri et al., “DC-Link Capacitor Voltage Control for Single-Phase Shunt Active Power Filter with Step Size Error Cancellation in Self- Charging Algorithm,” IET Power Electronics, vol. 9, no. 2, pp. 323-335, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[19] Sen Ye et al., “Shunt Active Power Filter Based on Proportional Integral and Multi Vector Resonant Controllers for Compensating Nonlinear Loads,” Journal of Electrical and Computer Engineering, vol. 2018, pp. 1-12, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Tarek A. Kasmieh, and Hassan S. Omran, “Active Power Filter Dimensioning Using a Hysteresis Current Controller,” World Academy of Science, Engineering and Technology, vol. 52, pp. 233-237, 2009.
[Google Scholar]
[21] Mohammad Najjar et al., “Model Predictive Controllers with Capacitor Voltage Balancing for a Single-Phase Five- Level SiC/Si Based ANPC Inverter,” IEEE Open Journal of Power Electronics, vol. 2, pp. 202-211, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[22] A. Renault et al., “Current Control Based on Space Vector Modulation Applied to Three-Phase H-Bridge STATCOM,” 2020 IEEE International Conference on Industrial Technology (ICIT), Buenos Aires, Argentina, pp. 1066-1070, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[23] Alfredo Renault et al., “Analysis of H-Bridge STATCOM with Fault Phase Controlled by Modulated Predictive Current Control,” 2019 IEEE CHILEAN Conference on Electrical, Electronics Engineering, Information and Communication Technologies (CHILECON), Valparaiso, Chile, pp. 1-5, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[24] Alfredo Renault et al., “Modulated Predictive Current Control Technique for a Three-Phase Four-Wire Active Power Filter Based on H-Bridge Two-Level Converter,” 2018 53rd International Universities Power Engineering Conference (UPEC), Glasgow, UK, pp. 1-6, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[25] Leonardo Comparatore et al., “Finite Control Set Model Predictive Control Strategies for a Three-Phase Sevenlevel Cascade H-Bridge DSTATCOM,” 2018 7th International Conference on Renewable Energy Research and Applications (ICRERA), Paris, France, pp. 779- 784, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[26] Hanying Gao et al., “Seven-Level Active Power Filter Based On A Novel H-Bridge Power Topology Structure,” Eneergies, vol. 12, no. 15, pp. 1-16, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[27] Yu Wang et al., “A Simplified Minimum DC-Link Voltage Control Strategy for Shunt Active Power Filters,” Energies, vol. 11, no. 9, pp. 1-14, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[28] Bhim Singh, and Sabha Raj Arya, “Back-Propagation Control Algorithm for Power Quality Improvement Using DSTATCOM,” IEEE Transactions on Industrial Electronics, vol. 61, no. 3, pp. 1204-1212, 2014.
[CrossRef] [Google Scholar] [Publisher Link]