A Novel DG Integrated MF-AUPQC Device for ActivePower Quality Regulation in Utility-Grid Powered EV Charging Stations

International Journal of Electrical and Electronics Engineering
© 2024 by SSRG - IJEEE Journal
Volume 11 Issue 5
Year of Publication : 2024
Authors : Anil Kumar Dharavatu, Srinu Naik Ramavathu
pdf
How to Cite?

Anil Kumar Dharavatu, Srinu Naik Ramavathu, "A Novel DG Integrated MF-AUPQC Device for ActivePower Quality Regulation in Utility-Grid Powered EV Charging Stations," SSRG International Journal of Electrical and Electronics Engineering, vol. 11,  no. 5, pp. 27-44, 2024. Crossref, https://doi.org/10.14445/23488379/IJEEE-V11I5P104

Abstract:

Nowadays, global warming together environmental issues are declining rapidly due to the adoption of Electric Vehicles (EVs) over fossil-fuel-operated Internal Combustion Engine (ICE) vehicles. The substantial replacement of these EVs in the automobile sector has led to decreasing the ecological emissions, vehicle maintenance and running costs. Mostly, EVs are driven by battery packs and charge these batteries through utility-grid integrated charging stations. It is noted that identifying such charging stations may impact the utility grid due to grid-islanding, Power-Quality (PQ) issues, power shortages and, scheduled load interruptions, so on. To overcome the problems above, the modern power generation corridor has been integrated into the utility grid by employing a solar-photovoltaic powered Distributed Generation (DG) scheme. In this regard, mitigation of various PQ issues and integration of solar-PV enabled DG into utility-grid/EV charging stations has been considered as the major problem statement. The main goal of this work is to enhance PQ issues and continuous active-power exchanging support to both EV charging stations and utility-grid levels by proposing a Multi-Functional Active Universal Power-Quality Conditioner (MF-AUPQC) device. The proposed MF-AUPQC device is impressively constituted in both DG and PQ mitigation modes by using a novel Generalized Voltage-Current Reference (GVCR) controller; it extracts the fundamental reference voltage-current signals. The main emphasis of this work is the designing, operation and performance of the proposed GVCR-controlled MF-AUPQC device has been investigated under both DG and PQ mitigation modes by using Matlab/Simulink computing tools, presenting the analysis and interpretation of simulation results.

Keywords:

Distributed Generation, Electric vehicles charging stations, Generalized Voltage-Current Reference (GVCR) controller, Multi-Functional Active Universal Power-Quality Conditioner, Power-quality regulation.

References:

[1] Iqbal Husain et al., “Electric Drive Technology Trends, Challenges, and Opportunities for Future Electric Vehicles,” Proceedings of the IEEE, vol. 109, no. 6, pp. 1039-1059, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Bo Maclnnis, and Jon A. Krosnick, Climate Insights 2020: Electric Vehicles, Resources for the Future (RFF), 2020. [Online]. Available: https://www.rff.org/publications/reports/climateinsights2020-electric-vehicles.  
[3] J.C. Gomez, and M.M. Morcos, “Impact of EV Battery Chargers on the Power Quality of Distribution Systems,” IEEE Transactions on Power Delivery, vol. 18, no. 3, pp. 975-981, 2003.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Kevin J. Dyke, Nigel Schofield, and Mike Barnes, “The Impact of Transport Electrification on Electrical Networks,” IEEE Transactions on Industrial Electronics, vol. 57, no. 12, pp. 3917-3926, 2010.
[CrossRef] [Google Scholar] [Publisher Link]
[5] G. Papaefthymiou et al., “Distributed Generation vs Bulk Power Transmission,” 2008 First International Conference on Infrastructure Systems and Services: Building Networks for a Brighter Future (INFRA), Netherlands, pp. 1-6, 2008.
[CrossRef] [Google Scholar] [Publisher Link]
[6] Tianqiao Zhao et al., “A Flexible Operation of Distributed Generation in Distribution Networks with Dynamic Boundaries,” IEEE Transactions on Power Systems, vol. 35, no. 5, pp. 4127-4130, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[7] Mohammad Al-Muhaini, and Gerald T. Heydt, “Evaluating Future Power Distribution System Reliability Including Distributed Generation,” IEEE Transactions on Power Delivery, vol. 28, no. 4, pp. 2264-2272, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[8] J.M. Rondina, L. Martins Neto, and M.B. Alves, “Technology Alternative for Enabling Distributed Generation,” IEEE Latin America Transactions, vol. 14, no. 9, pp. 4089-4096, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Fei Liu et al., “Utilizing Aggregated Distributed Renewable Energy Sources with Control Coordination for Resilient Distribution System Restoration,” IEEE Transactions on Sustainable Energy, vol. 14, no. 2, pp. 1043-1056, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Abdulraheem H. Alobaidi et al., “Distribution Service Restoration with Renewable Energy Sources: A Review,” IEEE Transactions on Sustainable Energy, vol. 14, no. 2, pp. 1151-1168, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[11] Amresh Kumar Singh, Shailendra Kumar, and Bhim Singh, “Solar PV Energy Generation System Interfaced to Three Phase Grid with Improved Power Quality,” IEEE Transactions on Industrial Electronics, vol. 67, no. 5, pp. 3798-3808, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Shailendra Kumar, and Bhim Singh, “A Multipurpose PV System Integrated to a Three-Phase Distribution System Using an LWDF-Based Approach,” IEEE Transactions on Power Electronics, vol. 33, no. 1, pp. 739-748, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[13] S.J. Steffel et al., “Integrating Solar Generation on the Electric Distribution Grid,” IEEE Transactions on Smart Grid, vol. 3, no. 2, pp. 878-886, 2012.
[CrossRef] [Google Scholar] [Publisher Link]
[14] Surbhi Pankaj et al., “Electric Vehicle Charging Stations and their Impact on the Power Quality of Utility Grid,” 2022 International Conference on Decision Aid Sciences and Applications (DASA), Thailand, pp. 816-821, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[15] Xiao-Ping Zhang, and Zuanhong Yan, “Energy Quality: A Definition,” IEEE Open Access Journal of Power and Energy, vol. 7, pp. 430440, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[16] Omar N. Nezamuddin, Clayton L. Nicholas, and Euzeli Cipriano Dos Santos, “The Problem of Electric Vehicle Charging: State-of-the-Art and an Innovative Solution,” IEEE Transactions on Intelligent Transportation Systems, vol. 23, no. 5, pp. 4663-4673, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Suneet Singh, and Shimi Sudha Letha, “Various Custom Power Devices for Power Quality Improvement: A Review,” 2018 International Conference on Power Energy, Environment and Intelligent Control (PEEIC), India, pp. 689-695, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Yahia M. Esmail et al., “Mitigating Power Quality Disturbances in Smart Grid Using FACTS,” Indonesian Journal of Electrical Engineering and Computer Science (IJEECS), vol. 22, no. 3, pp. 1223-1235, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[19] Eklas Hossain et al., “Analysis and Mitigation of Power Quality Issues in Distributed Generation Systems Using Custom Power Devices,” IEEE Access, vol. 6, pp. 16816-16833, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Javier Roldán-Pérez et al., “On the Power Flow Limits and Control in Series-Connected Custom Power Devices,” IEEE Transactions on Power Electronics, vol. 31, no. 10, pp. 7328-7338, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[21] Tejinder Singh Saggu, and Lakhwinder Singh, “Comparative Analysis of Custom Power Devices for Power Quality Improvement in NonLinear Loads,” 2015 2nd International Conference on Recent Advances in Engineering & Computational Sciences (RAECS), India, pp. 15, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[22] N. Gowtham, and Shobha Shankar, “UPQC: A Custom Power Device for Power Quality Improvement”, Materials Today: Proceedings, vol. 5, no. 1, pp. 965-972, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[23] G. Satyanarayana et al., “A Critical Evaluation of Power Quality Features Using Hybrid Multi-Filter Conditioner Topology,” Green Computing Communication and Conservation of Energy (ICGCE) 2013 International Conference, pp. 731-736, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[24] G. Satyanarayana, and K. Lakshmi Ganesh, “Tuning a Robust Performance of Adaptive Fuzzy-PI Driven DSTATCOM for Non-Linear Process Applications,” Springer LNCS Series, pp. 523-533, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[25] Naeem Abas et al., “Power Quality Improvement Using Dynamic Voltage Restorer,” IEEE Access, vol. 8, pp. 164325-164339, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[26] Yonghui Ling, Yanjun Li, and Ji Xiang, “Load Support by Droop-Controlled Distributed Generations,” IEEE Transactions on Industrial Electronics, vol. 68, no. 9, pp. 8345-8355, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[27] Jiancheng Zhang, Bo Sun, and Daduan Zhao, “A Novel Event-Triggered Secondary Control Strategy for Distributed Generalized Droop Control in Microgrid Considering Time Delay,” IEEE Transactions on Power Electronics, vol. 38, no. 5, pp. 5963-5978, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[28] Nikita Hari, K. Vijayakumar, and Subhranshu Sekhar Dash, “A Versatile Control Scheme for UPQC for Power Quality Improvement,” 2011 International Conference on Emerging Trends in Electrical and Computer Technology, India, pp. 453-458, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[29] K. Palanisamy et al., “Instantaneous Power Theory Based Unified Power Quality Conditioner (UPQC),” 2010 Joint International Conference on Power Electronics, Drives and Energy Systems & 2010 Power India, India, pp. 1-5, 2010.
[CrossRef] [Google Scholar] [Publisher Link]
[30] Metin Kesler, and Engin Ozdemir, “Synchronous-Reference-Frame-Based Control Method for UPQC Under Unbalanced and Distorted Load Conditions,” IEEE Transactions on Industrial Electronics, vol. 58, no. 9, pp. 3967-3975, 2011.
[CrossRef] [Google Scholar] [Publisher Link]