Analysis of Solar PV Array Integration with DC-DC Converter and Battery-Integrated UPQC for Microgrid Power Quality Enhancement

International Journal of Electrical and Electronics Engineering
© 2024 by SSRG - IJEEE Journal
Volume 11 Issue 8
Year of Publication : 2024
Authors : R. Suja, K. Murugesan, R.Vignesh, Manjunatha
pdf
How to Cite?

R. Suja, K. Murugesan, R.Vignesh, Manjunatha, "Analysis of Solar PV Array Integration with DC-DC Converter and Battery-Integrated UPQC for Microgrid Power Quality Enhancement," SSRG International Journal of Electrical and Electronics Engineering, vol. 11,  no. 8, pp. 309-322, 2024. Crossref, https://doi.org/10.14445/23488379/IJEEE-V11I8P127

Abstract:

PV (Photovoltaic) fed UPQC (Unified Power Quality Conditioner) systems are innovative solutions for improving Power Quality (PQ) in microgrids that incorporate solar PV arrays. These systems combine the advantages of solar power generation with the power conditioning capabilities of UPQC technology to enhance the overall efficiency and reliability of microgrids. Super-Lift Luo Converter, which significantly contributes to optimizing the utilization of solar power and improving the power quality of the microgrid, is implemented in this work. By integrating the converter into UPQC, the PV system actively compensates for PQ issues in the microgrid. The Type-2 Fuzzy Logic Controller (T2 FLC) based MPPT (Maximum Power Point Tracking) control mechanism helps regulate the output voltage and assures a constant and high-quality power supply to the loads. Additionally, battery storage allows for the capture and storage of excess energy generated by PV arrays during periods of high solar irradiation. This stored energy is used in periods of low solar generation or high load demand, effectively balancing the energy supply and demand. Furthermore, the current harmonics are eliminated using the PI controller-assisted DQ theory. The entire proposed system is verified using the MATLAB platform.

Keywords:

PV system, UPQC, Super-Lift Luo converter, microgrid, T2 FLC-based MPPT.

References:

[1] Leonardo Bruno Garcia Campanhol et al., “Single-Stage Three-Phase Grid-Tied PV System With Universal Filtering Capability Applied to DG Systems and AC Microgrids,” IEEE Transactions on Power Electronics, vol. 32, no. 12, pp. 9131-9142, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Pragnyashree Ray, Pravat Kumar Ray, and Santanu Kumar Dash, “Power Quality Enhancement and Power Flow Analysis of a PV Integrated UPQC System in a Distribution Network,” IEEE Transactions on Industry Applications, vol. 58, no. 1, pp. 201-211, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Santanu Kumar Dash, and Pravat Kumar Ray, “Power Quality Improvement Utilizing PV Fed Unified Power Quality Conditioner Based on UV-PI and PR-R Controller,” CPSS Transactions on Power Electronics and Applications, vol. 3, no. 3, pp. 243-253, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[4] Hina Mahar et al., “Implementation of ANN Controller Based UPQC Integrated with Microgrid,” Mathematics, vol. 10, no. 12, pp. 1-24, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Leonardo Bruno Garcia Campanhol et al., “Power Flow and Stability Analyses of a Multifunctional Distributed Generation System Integrating a Photovoltaic System With Unified Power Quality Conditioner,” IEEE Transactions on Power Electronics, vol. 34, no. 7, pp. 6241-6256, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[6] Varadharajan Balaji, and Subramanian Chitra, “Power Quality Management in Electrical Grid Using SCANN Controller-Based UPQC,” Bulletin of the Polish Academy of Sciences, Technical Sciences, vol. 70, no. 1, pp. 1-9, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[7] Koganti Srilakshmi et al., “Artificial Intelligence based Multi-Objective Hybrid Controller for PV-Battery Unified Power Quality Conditioner,” International Journal of Renewable Energy Research, vol. 12, no. 1, pp. 495-504, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Javed Ahmad et al., “A New High-Gain DC-DC Converter with Continuous Input Current for DC Microgrid Applications,” Energies, vol. 14, no. 9, pp. 1-14, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Yonghao Gui et al., “Large-Signal Stability Improvement of DC-DC Converters in DC Microgrid,” IEEE Transactions on Energy Conversion, vol. 36, no. 3, pp. 2534-2544, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Pandav Kiran Maroti et al., “New Tri-Switching State Non-Isolated High Gain DC–DC Boost Converter for Microgrid Application,” IET Power Electronics, vol. 12, no. 11, pp. 2741-2750, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[11] Xiangke Li et al., “A Novel Assorted Nonlinear Stabilizer for DC–DC Multilevel Boost Converter with Constant Power Load in DC Microgrid,” IEEE Transactions on Power Electronics, vol. 35, no. 10, pp. 11181-11192, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Ali M. Jasim, Basil H. Jasim, and Bogdan-Constantin Neagu, “A New Decentralized PQ Control for Parallel Inverters in Grid-Tied Microgrids Propelled by SMC-Based Buck-Boost Converters,” Electronics, vol. 11, no. 23, pp. 1-24, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[13] K. Vasudevan, and R. Ramesh, “Power Quality Analysis of Hybrid Cuk Converter Based on Micro Grid Distributed Power Generation System,” Journal of Electrical Engineering, vol. 18, no. 4, 2018.
[Google Scholar]
[14] Harish Chandra Mohanta et al., “An Optimized PI Controller-Based SEPIC Converter for Microgrid-Interactive Hybrid Renewable Power Sources,” Wireless Communications and Mobile Computing, vol. 2022, no. 1, pp. 1-10, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[15] P. Sivagami, and N.M. Jothiswaroopan, “Optimal Control Strategy Using PV Based LUO Converter for a Micro Grid to an Unelectrified Zone,” Journal of Green Engineering, vol. 10, pp. 463-479.
[Google Scholar]
[16] Hemanth Kumar Raju Alluri et al., “Optimal Tuning of PI Controllers for DFIG-Based Wind Energy System Using Self-adaptive Differential Evolution Algorithm,” International Journal on Electrical Engineering and Informatics, vol. 11, no. 2, pp. 352-372, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Meenakshi Rastogi, Aijaz Ahmad, and Abdul Hamid Bhat, “Performance Investigation of Two-Level Reduced-Switch D-STATCOM in Grid-Tied Solar-PV Array with Stepped P&O MPPT Algorithm and Modified SRF Strategy,” Journal of King Saud University-Engineering Sciences, vol. 35, no. 6, pp. 393-405, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Oumnia Lagdani, Mourad Trihi, and Badre Bossoufi, “PV Array Connected to the Grid with the Implementation of MPPT Algorithms (INC, P&O and FL Method),” International Journal of Power Electronics and Drive Systems, vol. 10. 4, pp. 2084-2095, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[19] Vinit Kumar, and Mukesh Singh, “Derated Mode of Power Generation in PV System Using Modified Perturb and Observe MPPT Algorithm,” Journal of Modern Power Systems and Clean Energy, vol. 9, no. 5, pp. 1183-1192, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Lijun Zhao et al., “Grid-Tied PV-BES System Based on Modified Bat Algorithm-FLC MPPT Technique under Uniform Conditions,” Neural Computing and Applications, vol. 33, pp. 14929-14943, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[21] Damodhar Reddy, and Sudha Ramasamy, “A Fuzzy Logic MPPT Controller Based Three Phase Grid-Tied Solar PV System with Improved CPI Voltage,” 2017 Innovations in Power and Advanced Computing Technologies (i-PACT), Vellore, India, pp. 1-6, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[22] Tao Jin et al., “An Effective Compensation Control Strategy for Power Quality Enhancement of Unified Power Quality Conditioner,” Energy Reports, vol. 6, pp. 2167-2179, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[23] Hina Mahar et al., “Implementation of ANN Controller Based UPQC Integrated with Microgrid,” Mathematics, vol. 10, no. 12, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[24] Tongfei Lei et al., “Performance Analysis of Grid-Connected Distributed Generation System Integrating a Hybrid Wind-PV Farm Using UPQC,” Complexity, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[25] Farzam Nejabatkhah et al., “Modeling and Control of a New Three-Input DC–DC Boost Converter for Hybrid PV/FC/Battery Power System,” IEEE Transactions on Power Electronics, vol. 27, no. 5, pp. 2309-2324, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[26] Francarl Galea et al., “Design of a High Efficiency Wide Input Range Isolated Cuk Dc-Dc Converter for Grid Connected Regenerative Active Loads,” World Federation of Engineering Organizations, pp. 1-11, 2011.
[Google Scholar] [Publisher Link]
[27] Patan Javeed et al., “SEPIC Converter for Low Power LED Applications,” Iraqi Academics Syndicate International Conference for Pure and Applied Sciences, Babylon, Iraq, vol. 1818, pp. 1-19, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[28] S. Sivarajeswari, and D. Kirubakaran, “Retracted: Design and Development of Efficient Luo Converters for DC Micro Grid,” International Journal of Electrical Engineering & Education, vol. 60, no. 1, pp. 40-48, 2023.
[CrossRef] [Google Scholar] [Publisher Link]