Petrographic Study and Rock Quality Assessment of Some Selected Granitoids of the Kongo area, Upper East Region-Ghana

International Journal of Geoinformatics and Geological Science

© 2019 by SSRG - IJGGS Journal

Volume 6 Issue 2

Year of Publication : 2019

Authors : Kazapoe W. R.,Nyantakyi D.E., Amuah Y.E.E.

10.14445/23939206/IJGGS-V6I2P108

How to Cite?

Kazapoe W. R.,Nyantakyi D.E., Amuah Y.E.E., "Petrographic Study and Rock Quality Assessment of Some Selected Granitoids of the Kongo area, Upper East Region-Ghana," SSRG International Journal of Geoinformatics and Geological Science, vol. 6,  no. 2, pp. 58-66, 2019. Crossref, https://doi.org/10.14445/23939206/IJGGS-V6I2P108

Abstract:

The suitability of rocks as both construction materials and as sites of constructions are heavily dependent on their geological and geotechnical characteristics. Though the Kongo area in Northeastern Ghana is enriched with rocks that can be utilized for engineering activities, details of the qualities of the various distinctive granitic rocks still require further evaluation. This study focused mainly on the petrographic mapping of the area coupled with an examination of the geotechnical characteristics rocks towards ascertaining the engineering applications he rocks may be applied to. Sixteen rock samples were collected from the area for petrographic analysis. These samples were then tested for density, abrasive resistance, and porosity. The Pycnometer and Los Angeles Abrasion test methods were adopted to respectively estimate rock density and abrasive resistance. Porosity was measured as a percentage of the ratio of the difference in the soaked and dry weight to the dry weight, whereas wearing percentage was estimated as the abrasive value. The identified granitoids included porphyritic granitoids, Tonalitic rocks, Muscovite-Biotitegranitoid and quartz-plagioclase porphyry, as they were studied to be granodioritic in character rather than true granites. The study revealed that, the granitoids were well fractured with joints and faults. Some of the granitoids had low porosity and abrasion resistance, making them suitable for certain engineering works. However, these were restricted in quality by their low densities.

Keywords:

Birimian, Bole-Nangodi, Kongo, Pycnometer, Los Angeles Abrasion Test

References:

[1] J. L. Feybesse, M. Billa, C. Guerrot, E. Duguey, J.L. Lescuyer, J.P. Milesi, andV. Bouchot.The paleoproterozoic Ghanaian province: Geodynamic model and ore controls, including regional stress modeling.Precambrian Research, 149(3-4), 149-196, 2006.
[2] M. Boher, W. Abouchami, A. Michard, F. Albarede, and N.T. Arndt. Crustal growth in west Africa at 2.1 Ga.Journal of Geophysical Research: Solid Earth, 97(B1), 345-369, 1992.
[3] G.S. De Kock, H. Théveniaut, P.MW. Botha, and W. Gyapong. Timing the structural events in the PalaeoproterozoicBolé–Nangodi belt terrane and adjacent Maluwe basin, West African craton, in central-west Ghana.Journal of African Earth Sciences, 65, 1-24, 2012.
[4] K. Sivanandhini, S. Subasree, R. Preethika, and M. Meenakshi. Experimental Study on using Basalt as a Construct Material. SSRG International Journal of Civil Engineering, 6(4), 11-12, 2019.
[5] Ghana Statistical Service. Population and Housing Census. District Analytical Report. Nabdam District, 2010.http://www.statsghana.gov.gh/docfiles/2010_District_Report/Upper%20East/NABDAM.pdf,Accessed January 3, 2019.
[6] R.J. Murray. The geology of the Zuarungu 1/2° field sheet. Geol. Surv. Ghana Bull, 25, 1960.
[7] K. Attoh. Structure, gravity models and stratigraphy of an early Proterozoic volcanic—sedimentary belt in northeastern Ghana.Precambrian Research, 18(3), 275-290, 1982.
[8] Independent Geologists’ Report (IGR). Bolgatanga Gold Project, Ghana Subranum Gold Project, Ghana Kilo-Moto Gold Project, Democratic Republic of Congo.SRK Consulting. West Perth, Australia, 2012.
[9] M. Brun, A. Lallemand, J.F.Quinson, and C. Eyraud. A new method for the simultaneous determination of the size and shape of pores: the thermoporometry.Thermochimicaacta, 21(1), 59-88, 1977.
[10] T.E. Scott,andK.C. Nelson. The effects of porosity on brittle-ductile transition in Sandstones. J Geophys. Res 96, pp 405-414, 1991.
[11] E. ASTM. 1049-85, Standard practices for cycle counting in fatigue analysis.Annual book of ASTM standards, 3(01), 614-620, 2005.