Tensile Analysis of Filament Wound Glass Epoxy Struts Tested Under Both Ends Hinged Condition

International Journal of Industrial Engineering

© 2018 by SSRG - IJIE Journal

Volume 5 Issue 2

Year of Publication : 2018

Authors : Mrs. K.Vijayasree, Dr Ravishankar, D. V, Dr. P. Ram Reddy

10.14445/23499362/IJIE-V5I2P101

How to Cite?

Mrs. K.Vijayasree, Dr Ravishankar, D. V, Dr. P. Ram Reddy, "Tensile Analysis of Filament Wound Glass Epoxy Struts Tested Under Both Ends Hinged Condition," SSRG International Journal of Industrial Engineering, vol. 5,  no. 2, pp. 1-5, 2018. Crossref, https://doi.org/10.14445/23499362/IJIE-V5I2P101

Abstract:

As one of the most efficient structures glass fiber reinforced polymer composite truss is typically find its applications in advanced transport engineering field. The composite truss should consider not only in problem of mass but also the buckling load. The major applications of composite truss are airship, iso truss, and space truss bridges. This paper presents the results of an experimental investigation into the behaviour of filament wound multi directional glassfiber /epoxy strut under tensile loading, considered as both ends hinged condition.

Keywords:

Glass Epoxy Struts, Tensile Analysis

References:

[1] MichaelR.Wisnom, Jurgen Haberle- “Prediction of buckling and failure of unidirectional carbon fiber/epoxy struts- Composite Structures28” (1994)229-239.
[2] Suzan A.A.Mustafa, Struart S.j.Moy- “Strengthening cast iron struts using carbon fibre reinforced polymers-finite element modeling”-Composites: part B42(2011)1048-1056.
[3] S.K.Deb Nath,S.Reaz Ahmed- “Displacement potential solution of stiffened composite struts subjected to eccentric loading”-Applied mechanical modeling 33(2009)1761-1775.
[4] P.D.Soden,R.Kitching,P.C.Tse,Y.Tsavalas-“Influence of winding angle on the strength and deformation of filament wound composite tubes subjected to uniaxial and biaxial loads”-composite science and technology 46 (1993)363-378.
[5] A.E.Antoniou, D.Van Herelrijck T.P.Philippidis-“Failure prediction for a glass/epoxy cruciform specimen under static biaxial loading”–composite science and technology 70(2010)1232-1241.
[6] A.S.Kaddour, M.j.Hinton, P.d Sodden –“Behaviour of ±450 glass/epoxy filament wound composite tubes under quasistatic equal biaxial tension-compression loading: experimental results”-composite part B 43(2003)689-704.
[7] P.Mertiny, F.Ellyn, A.Hothan- “An experimental investigation on the effect of multiangle filament winding on the strength of tubular composite structures” -Composite science and technology 64 (2004)1-9.
[8] Michele D’Ottavio, Olivier politt, wooseok ji, Anthony M.”Waas-Benchmark solutions and assement of variable kinematics models for global and local buckling of sandwich struts” -Composite structures XXX (2016) XXXXXX.
[9] Qian sui,Hualin fan, Changliang lai- “Failure analysis of 1D lattice truss composite structure in uniaxial compression” -Composite science and technology 118(2015)207-216.
[10] H.Bansemir and O.Haider- “fiber composite structures for space applications” – recent and future developments-PH: S0011-2275(97)00110-0.
[11] Dawn C.Jegley and ChaunceyWu- “Structural efficiency of composite struts for aerospace applications” -Journal of space craft and rockets vol.49, no.5, September-October 2012.
[12] M.Martens, F.Ellyin- “Biaxial monotonic behavior of a multidirectional glass fiber epoxy pipe”-Composites part A 31(2000)1001-1014.
[13] F.Ellyn, M.martens- “Biaxial fatigue behaviour of a multidirectional filament–wound glass”-fiber/epoxy pipe. Composite science and technology 61(2001)491-502.
[14] Roham Rafiee, behzad mazhari – “Evaluating long–term performance of glass fiber reinforced plastic pipes subjected to internal pressure”. Composite and building materials 122(2016)694-701.
[15] David L.Mc danels- “Analysis of stress –strain, fracture and ductility behavior of aluminum matrix composites containing discontinuous silicon carbide reinforcement”. Material research engineer, NASA Lewis research center, Cleveland, OH44135.
[16] Xiaolei Zhu,Rujie He,Xiaofeng Lu,Xiang Ling,Lingxue Zhu,Bin Liu- “A optimization Technique for the composite strut using genetic algorithms” -material and design 65(2015)482-488.
[17] L C Hollaway and cadel,University of surrey,UK,faber Maunsell, Beckenham,UK- “Progress in the technique of upgrading metallic structures with advanced polymer composites”-prog.strut.engg mater,202:4:131-148(doi:10.1002/pse:112).