Process Design and Performance Analysis of Mixed Model Assembly Line Using Analytical and Discrete Event Simulation Method

International Journal of Industrial Engineering

© 2024 by SSRG - IJIE Journal

Volume 11 Issue 2

Year of Publication : 2024

Authors : Rugved Patkar, Mahesh Ghanekar, Sharnappa Joladarashi

10.14445/23499362/IJIE-V11I2P101

How to Cite?

Rugved Patkar, Mahesh Ghanekar, Sharnappa Joladarashi, "Process Design and Performance Analysis of Mixed Model Assembly Line Using Analytical and Discrete Event Simulation Method," SSRG International Journal of Industrial Engineering, vol. 11,  no. 2, pp. 1-15, 2024. Crossref, https://doi.org/10.14445/23499362/IJIE-V11I2P101

Abstract:

The assembly line in any manufacturing industry serves the utmost importance in the entire manufacturing system as it represents the final production of the factory floor. The rate of production of industry is governed by the cycle time at the bottleneck station. Therefore, the cycle time analysis of the assembly line using standard work measurement techniques is of utmost importance for assessing the productivity of the shopfloor. In order to address the ever-increasing demands of capacity, the systematic methodology for work measurement, process design and two-sided mixed-model assembly line balancing (TSMMALB) has been proposed. Initially, the analytical model was presented to evaluate the performance parameters of the assembly line. The assembly line balancing problem was systematically analysed using industrial engineering techniques of time study, and the corresponding balancing of work elements was performed using the Ranked-Positional Weighs Method (RPWM). The number of workstations required to design an assembly line was kept fixed in accordance with the cycle time requirements. The problem was further extended to multi-objective genetic optimization (MOGA) of the assembly line with objectives of minimizing cycle time and workload variation and maximizing the throughput in terms of line efficiency. The entire cycle time measurement was performed by Predetermined Motion Time Systems (PMTS) as an established work measurement standard. The hypothesis test of cycle time against models was performed to analyse variations in the means and standard deviations of cycle times by Analysis of Variance (ANOVA) using MINITAB© statistical software. In the last part of the paper, discrete event simulation of the process was performed using AnyLogic© software. The simulation provided comprehensive results of standard productivity Key Performance Indicators (KPI), including mean flow times and capacity utilization, to evaluate the pace of the manufacturing system. In future, the correlation between the mathematical model and the discrete event model can be investigated for hybrid-flexible assembly systems.

Keywords:

Assembly systems, Line balancing, Hypothesis testing, Optimization, Discrete event simulation.

References:

[1] Avinash Kumar, L.N. Pattanaik, and Rajeev Agrawal, “Optimal Sequence Planning for Multi-Model Reconfigurable Assembly Lines,” International Journal of Advanced Manufacturing and Technology, vol. 100, pp. 1719-1730, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Şirin Barutçuoğlu, and Meral Azizoğlu, “Flexible Assembly Line Design Problem with Fixed Number of Workstations,” International Journal of Production Research, vol. 49, no. 12, pp. 3691-3714, 2010.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Joseph Bukchin, and Michal Tzur, “Design of Flexible Assembly Line to Minimize Equipment Cost,” IIE Transactions, vol. 32, pp. 585- 598, 2000.
[CrossRef] [Google Scholar] [Publisher Link]
[4] S.J. Hu et al., “Assembly System Design and Operations for Product Variety,” CIRP Annals, vol. 60, no. 2, pp. 715-733, 2011.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Guido Huettemann, Christian Gaffry, and Robert H. Schmitt, “Adaption of Reconfigurable Manufacturing Systems for Industrial Assembly – Review of Flexibility Paradigms, Concepts and Outlook,” Procedia CIRP, vol. 52, pp. 112-17, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[6] Wei Zhang, Liang Hou, and Roger J. Jiao, “Dynamic TAKT Time Decisions for Paced Assembly Line Balancing and Sequencing Considering Highly Mixed-Model Production: An Improved Artificial Bee Colony Optimization Approach,” Computers and Industrial Engineering, vol. 161, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[7] Fantahun M. Defersha, and Fatemeh Mohebalizadehgashti, “Simultaneous Balancing, Sequencing and Workstation Planning for MixedModel Manual Assembly Line using Hybrid Genetic Algorithm,” Computers and Industrial Engineering, vol. 119, pp. 370-387, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[8] H. Zupan, and N. Herakovic, “Production Line Balancing with Discrete Event Simulation: A Case Study,” IFAC-PapersOnLine, vol. 48, no. 3, pp. 2305-2311, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Elena-Iuliana Gingu, Miron Zapciu, and Mihai Sindil, “Balancing of Production Line Using Discrete Event Simulation Model,” Proceedings in Manufacturing Systems, vol. 9, no. 4, pp. 227-232, 2014.
[Google Scholar] [Publisher Link]
[10] Akshay Sarda, and Abhijeet K. Digalwar “Performance Analysis of Vehicle Assembly Line Using Discrete Event Simulation Modelling,” International Journal of Business Excellence, vol. 14, no. 2, pp. 240-255, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[11] E.A.H. Hanash et al., “Throughput Enhancement of Car Exhaust Fabrication Line by Applying MOST,” IOP Conference Series: Materials Science and Engineering, vol. 184, pp. 1-14, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[12] K.V. Vikram, D.N. Shivappa, and Jaganur Sangamesha, “Establishing Time Standards for Fixing Body Side Panel to the Chassis in Assembly Line Using MOST,” Proceedings of the National Conference on Trends and Advances in Mechanical Engineering, YMCA University of Science & Technology, Faridabad, Haryana, pp. 811-818, 2012.
[Google Scholar]
[13] Prashant Rao Meshram, and Rupendra Marre, “Process Optimization by Elimination of NVA Activities through 'MOST' Technique,” International Journal Mechanical and Production Engineering, vol. 5, no. 11, pp. 6-10, 2017.
[Google Scholar] [Publisher Link]
[14] Ashish R. Thakre, Dhananjay A. Jolhe, and Anil C. Gawande, “Minimization of Engine Assembly Time by Elimination of Unproductive Activities through MOST,” 2009 Second International Conference on Emerging Trends in Engineering & Technology, Nagpur, India, pp. 785-789, 2010.
[CrossRef] [Google Scholar] [Publisher Link]
[15] Anuja Pandey, V.S. Deshpande, and Santosh Gunjar, “Application of Maynard Operation Sequencing Technique (MOST) – A Case Study,” International Journal of Innovative Engineering Science and Technology, vol. 6, no. 3, pp. 39-44, 2016.
[Google Scholar] [Publisher Link]
[16] P. Doung, R. Sirovetnukul, and J. Ren, “Simulation-Based Assembly Line Balancing in U-Shaped, Parallel U-Shaped, and Parallel Adjacent U-Shaped Layouts,” 2020 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, pp. 751-755, 2020.
[CrossRef] [Google Scholar] [Publisher Link]
[17] Yeong Wei Ng, Joshua Chan Ren Jie, and Shahrul Kamaruddin, “Analysis of Shopfloor Performance through Discrete Event Simulation: A Case Study,” Journal of Industrial Engineering, vol. 2014, pp. 1-10, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[18] Olcay Polat, Özcan Mutlu, and Elif Özgormus, “A Mathematical Model for Assembly Line Balancing Problem Type 2 Under Ergonomic Workload Constraint,” Ergonomics Open Journal, vol. 11, pp. 1-10, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[19] Matic Breznik, Borut Buchmeister, and Nataša Vujica Herzog, “Assembly Line Optimization Using MTM Time Standard and Simulation Modeling _ A Case Study,” Applied Science, vol. 13, no. 10, pp. 1-10, 2023.
[CrossRef] [Google Scholar] [Publisher Link]
[20] Ala Qattawi, and Sreenath Chalil Madathil, “Assembly Line Design Using Hybrid Approach of Lean Manufacturing and Balancing Models,” Production and Manufacturing Research, vol. 7, no. 1, pp. 125-142, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[21] Gustavo Reginato et al., “Mix Assembly Line Balancing Method in Scenarios with Different Mix of Products,” Journal of Management and Production, vol. 23, no. 2, pp. 294-307, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[22] Dorota Klimecka-Tatar, and Vishvajit Shinde, “Improvement of Manual Assembly Lines Based on Value Stream Mapping and Effectiveness Coefficient,” Conference Quality Production Improvement _ CQPI, vol. 1, no. 1, pp. 537-544, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[23] Ravikumar Kamble, and Vinayak Kulkarni, “Productivity Improvement at Assembly Station using Work Study Techniques,” International Journal of Research in Engineering and Technology, vol. 3, pp. 480-487, 2014.
[Google Scholar] [Publisher Link]
[24] Hari Krishna Kaka et al., “Productivity Improvement of an Assembly Line Using MOST and Heuristics,” International Journal of Innovative Technology and Exploring Engineering, vol. 8, no. 9, pp. 3367-3403, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[25] Alper Hamzadayi, and Gokalp Yildiz, “A Simulated Annealing Algorithm Based Approach for Line Balancing and Sequencing of MixedModel U-Lines,” Computers and Industrial Engineering, vol. 66, no. 4, pp. 1070-1084, 2013.
[CrossRef] [Google Scholar] [Publisher Link]
[26] Stefan Bock, and Nils Boysen, “Integrated Real Time Control for Mixed-Model Assembly Lines and their Part Feeding Process,” Computers and Industrial Engineering, vol. 132, pp. 1-17, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[27] Thiago Cantos Lopes et al., “Balancing and Cyclical Scheduling of Asynchronous Mixed-Model Assembly Line with Parallel Stations,” Journal of Manufacturing Systems, vol. 50, pp. 193-200, 2019.
[CrossRef] [Google Scholar] [Publisher Link]
[28] Xuemei Liu, Xiaolang Yang, and Mingliang Lei, “Optimization of Mixed-Model Assembly Line Balancing Problem under Uncertain Demand,” Journal of Manufacturing Systems, vol. 59, pp. 214-227, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[29] Qidong Yin, Xiaochuan Luo, and Julien Hohenstein, “Design of Mixed-Model Assembly Lines Integrating New Energy Vehicles,” Machines, vol. 9, no. 12, pp. 1-23, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[30] Akshay Sarda, and Abhijeet K. Digalwar, “Performance Analysis of Vehicle Assembly Line Using Discrete Event Simulation Modelling,” International Journal of Business Excellence, vol. 14, no. 2, pp. 240-255, 2014.
[CrossRef] [Google Scholar] [Publisher Link]
[31] Muthanna Jamil, and Noraini Mohd Razali, “Simulation of Assembly Line Balancing in Automotive Component Manufacturing,” IOP Conference Series: Materials Science and Engineering, vol. 114, pp. 1-9, 2016.
[CrossRef] [Google Scholar] [Publisher Link]
[32] Mahmoud Heshmat, Mahmoud El-Sharief, and Mohamed El-Sebaie, “Simulation Modelling and Analysis of a Production Line,” International Journal of Simulation and Process Modelling, vol. 12, no. 3-4, pp. 369-376, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[33] Kjell B. Zandin, and Therese M. Schmidt, MOST® Work Measurement Systems, 4 th ed., Boca Raton: CRC Press, pp. 1-354, 2020.
[CrossRef] [Google Scholar] [Publisher Link]