Stream Lining of the Parameters of Electrochemical Machining for Composite Material

International Journal of Mechanical Engineering

© 2018 by SSRG - IJME Journal

Volume 5 Issue 4

Year of Publication : 2018

Authors : A.Rajesh Kumar

10.14445/23488360/IJME-V5I4P105

How to Cite?

A.Rajesh Kumar, "Stream Lining of the Parameters of Electrochemical Machining for Composite Material," SSRG International Journal of Mechanical Engineering, vol. 5,  no. 4, pp. 22-26, 2018. Crossref, https://doi.org/10.14445/23488360/IJME-V5I4P105

Abstract:

Electrochemical machining is a skilled technician with some advantages, for example, a high machining rate, and can be utilized on awide variety of difficult to process materials. ECM is a current machining process based on the theory of electrolysis, and thus itis commonly termed as the reverse method of electroplating. ECM, the maximum MRR can be achieved with the best surface qualities. The current work has been taken to examine the MRR by controlled anodic dissolution on the atomic level of the electrically conductive workpiece with carbon fiber, and copper is taken as electrode and solution is NaCl. This method raises the machining process's overall price and creates an imperfect layer on the machining surface.

Keywords:

Electrochemical Machining, Surface Roughness, Conventional Machining, MRR

References:

[1] Gey, C., 2003. Prozessauslegungfür das Flankenfräsen von Titan, Dissertation RWTH, Shaker Verlag GmbH Aachen, Aachen.
[2] Denkena, B., Kindermann, R., Hollmann, C., 2004. "High-Performance Cutting of Aerospace-Materials," Production Engineering 11, p.15.
[3] Kuljanic, E., Fiorette, M., Beltrame, L., Miani, F., 1998. "Milling Titanium Compressor Blades with PCD Cutter", CIRP Annals - Manufacturing Technology 47, p. 61.
[4] Rao RV, Pawar PJ, Shankar R. "Multi-objective optimization of electrochemical machining process parameters using a particle swarm optimization algorithm". J EngManuf 2008; 222(8): 949–58.
[5] Burger M, Koll L, Werner EA, Platz A. "Electrochemical machining characteristics and resulting surface quality of the nickel-base single-crystalline material LEK94". J Manuf Processes 2012; 14 (1):62–70.
[6] "Electrochemical Process" International Journal of Applied Engineering and Technology, 2014 Vol. 4 (1), pp.68-71, 2014.
[7] AndiSudiarso, NurLatifah F. Ramdhani, and Muslim Mahardika" "Material Removal Rate on ElectrochemicalMachining of Brass, Stainless Steel, and aluminum using Brass Electrodes" International Journal of Mining, Metallurgy & Mechanical Engineering (IJMMME) Volume 1, Issue 1, 2013, pp. 2320–4060.
[8] A. Pavankumar,b.jyothunaik, ch. Venkata Rao, sadineniramarao. "optimization of casting parameters for the casting of al/rha/rm hybrid composites using Taguchi method". International journal of engineering trends and technology (ijett)
[9] Gey, C., “Prozessauslegungfür das Flankenfräsen von Titan”Dissertation RWTH, Shaker Verlag GmbH Aachen, Aachen, 2003
[10] Klocke, F., König, W.FertigungsverfahrenEdt. 2007
[11] T. Koyanoa, M. Kunieda, "Ultra-short pulse ECM using electrostatic induction feeding method", Procedia CIRP vol. 6, pp. 390-394, 2013
[12] Mr. S. S. Uttarwar, Dr. I. K. Chopade "Effect Of Voltage Variation On MRR ForStainlessSteel EN Series 58A (AISI 302B) In ElectrochemicalMachining: A Practical Approach" World Congress on Engineering,Vol II, 2009.