Study of Oil-In-Water Emulsion Performance In MQL And MQCL Hard Milling of AISI D2 Tool Steel

International Journal of Mechanical Engineering

© 2021 by SSRG - IJME Journal

Volume 8 Issue 6

Year of Publication : 2021

Authors : Pham Quang Dong

10.14445/23488360/IJME-V8I6P103

How to Cite?

Pham Quang Dong, "Study of Oil-In-Water Emulsion Performance In MQL And MQCL Hard Milling of AISI D2 Tool Steel," SSRG International Journal of Mechanical Engineering, vol. 8,  no. 6, pp. 9-12, 2021. Crossref, https://doi.org/10.14445/23488360/IJME-V8I6P103

Abstract:

The work presents an experimental investigation on the effect of oil-in-water emulsion performance of minimum quantity lubrication (MQL) and minimum quantity cooling lubrication (MQCL) in hard milling of AISI D2 tool steel (60-62 HRC). The response parameter, including cutting force components Fx, Fy, Fz under MQL and MQCL conditions, is studied and compared. The results of this work show that machinability of coated carbide tools improves due to the better cooling and lubricating effects. MQCL shows the better results than MQL due to the superior cooling performance, from which the cutting forces, cutting temperature, and tool wear significantly reduce and therefore tool life prolongs about 57% compared to MQL condition.

Keywords:

Hard milling, MQL, MQCL, oil-in-water emulsion, cutting force.

References:

[1] J.P. Davim, Machining of Hard Materials, First Ed. London, UK: Springer-Verlag (2011) 1-8.
[2] G. Gaurav, A. Sharma, G.S. Dangayach, M.L. Meena, Assessment of jojoba as a pure and nano-fluid base oil in minimum quantity lubrication (MQL) hard-turning of Ti-6Al-4V: A step towards sustainable machining, Journal of Cleaner Production 272(1) (2020) 122553.
[3] T.M. Duc, T.T. Long, T.B. Ngoc, Performance of Al2O3 nanofluids in minimum quantity lubrication in hard milling of 60Si2Mn steel using cemented carbide tools, Adv. Mech. Eng. 9(2017) 1–9.
[4] P.-H. Lee, J.S. Nam, C. Li, S.W. Lee, An experimental study on micro-grinding process with nanofluid minimum quantity lubrication (MQL), Int. J. Precis. Eng. Manuf. 13(2012) 331–38.
[5] A. Garg, S. Sarma, B. Panda, J. Zhang, L. Gao, Study of effect of nanofluid concentration on response characteristics of machining process for cleaner production, J. Clean. Prod. 13(2016) 476–489.
[6] M. Kang, K. Kim, S. Shin, S. Jang, J. Park, C. Kim, Effect of the minimum quantity lubrication in high-speed end-milling of AISI D2 cold-worked die steel (62 HRC) by coated carbide tools. Surf. Coat. Technol. 202(2008) 5621–5624.
[7] F. Gong, J. Zhao, Y. Jiang, H. Tao, Z. Li, J. Zang, Fatigue failure of coated carbide tool and its influence on cutting performance in face milling SKD11 hardened steel, Int. Journal of Refractory Metals and Hard Materials 64(2017) 27 –34.
[8] C. Y. Wang, Y. X. Xie, Z. Qin, H.S. Lin, Y. H. Yuan, Q. M. Wang, Wear and breakage of TiAlN- and TiSiN-coated carbide tools during high-speed milling of hardened steel, Wear, 336(2015) 29-42.
[9] C.S. Kumar, S.K. Patel, Effect of WEDM surface texturing on Al2O3/TiCN composite ceramic tools in dry cutting of hardened steel, Ceram. Int. 44 (2018) 2510–2523.
[10] Y. Xing, J. Deng, J. Zhao, G. Zhang, K. Zhang, Cutting performance and wear mechanism of nanoscale and microscale textured Al2O3/TiC ceramic tools in dry cutting of hardened steel, Int. J. Refract. Met. Hard Mater. 43 (2014) 46–58.
[11] Y. Su, Z. Li, L. Li, J. Wang, H. Gao, G. Wang, Cutting performance of micro-textured polycrystalline diamond tool in dry cutting. J. Manuf. Process. 27 (2017) 1–7.
[12] H. Hassanpour, M. H. Sadeghi, A. Rasti, S. Shajari, Investigation of surface roughness, microhardness and white layer thickness in hard milling of AISI 4340 using minimum quantity lubrication, Journal of Cleaner Production 120 (2016) 124-134.
[13] C. Cappellini, A. Attanasio, G. Rotella, D. Umbrello, Formation of white and dark layers in hard cutting: influence of tool wear, Int J Mater Form 3 (2010) 455-458.
[14] K.K. Joshi, R. Kumar, Anurag, An Experimental Investigations in Turning of Incoloy 800 in Dry, MQL and Flood Cooling Conditions, Procedia Manuf. 20 (2018) 350–357.
[15] L.T. Tunc, Y. Gu, M.G. Burke, Effects of Minimal Quantity Lubrication (MQL) on Surface Integrity in Robotic Milling of Austenitic Stainless Steel, Procedia CIRP 45(2016) 215–218.
[16] T.M. Duc, T.T. Long, T.B. Ngoc, Effectiveness of alumina nanofluid on slotting end milling performance of SKD 11 tool steel, J. Comput. Appl. Res. Mech. Eng. 9(2)(2020) 359-369.
[17] T.M. Duc, T.T. Long, T.Q. Chien, Performance Evaluation of MQL Parameters Using Al2O3 and MoS2 Nanofluids in Hard Turning 90CrSi Steel, Lubricants 7(5)(2019) 1-17.
[18] T. M. Duc, T.T. Long, P.Q. Dong, Effect of the alumina nanofluid concentration on minimum quantity lubrication hard machining for sustainable production, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 233(17) (2019) 5977-5988.
[19] R.W. Maruda, G. M. Krolczyk, S. Wojciechowski, K. Zak, W. Habrat, P. Nieslony, Effects of extreme pressure and anti-wear additives on surface topography and tool wear during MQCL turning of AISI 1045 steel, Journal of Mechanical Science and Technology 32(4)(2018) 1585–1591.
[20] R. W. Maruda, G. M. Krolczyk, P. Niesłony, J. B. Krolczyk, S. Legutko, Chip Formation Zone Analysis During the Turning of Austenitic Stainless Steel 316L under MQCL Cooling Condition, Procedia Engineering 149 (2016) 297–304.
[21] P. Q. Dong, T.M. Duc, T.T. Long, Performance Evaluation of MQCL Hard Milling of SKD 11 Tool Steel Using MoS2 Nanofluid, Metals 9 (2019) 658. [22] T. M. Duc, T. T. Long, T. Q. Chien, N. M. Tuan. Study of cutting forces in hard milling of Hardox 500 steel under MQCL condition using nano additives. SSRG International Journal of Mechanical Engineering 6(11) (2019) 1-7.
[23] R. Hilsch, The Use of the Expansion of Gases in a Centrifugal Field as Cooling Process, Rev. Sci. Instrum. 18 (1947) 108–113.
[24] G. Ramesh, G.R. Selokar, Design and Performance Evaluation of a Vortex Tube form by Copper Material, SSRG International Journal of Mechanical Engineering 5(11)(2018), 1-6.
[25] C.M. Anumula, K.D. Talluri, V. Sinha, A. Srinadh, Calculation of Tool Life of a Single Point Cutting Tool under Different Metallic Coatings, SSRG International Journal of Mechanical Engineering 6(4) (2019) 8-11.