Optimize the Parameters of the Barrette Grab Bucket based on the Objective Function of Minimizing the Tensile Stress of the Smallest Crawler Crane

International Journal of Mechanical Engineering

© 2023 by SSRG - IJME Journal

Volume 10 Issue 6

Year of Publication : 2023

Authors : Nguyen Van Thuyen

10.14445/23488360/IJME-V10I6P103

How to Cite?

Nguyen Van Thuyen, "Optimize the Parameters of the Barrette Grab Bucket based on the Objective Function of Minimizing the Tensile Stress of the Smallest Crawler Crane," SSRG International Journal of Mechanical Engineering, vol. 10,  no. 6, pp. 15-19, 2023. Crossref, https://doi.org/10.14445/23488360/IJME-V10I6P103

Abstract:

The barrette grab bucket is one of the important devices used in the construction of foundations for bridges and high-rise buildings. The productivity, quality, and construction cost of the pile holes depend on various parameters, such as the shape and size of the excavation bucket, the assembly position of the components on the excavation bucket, and the crawler crane serving the bucket. This article studies the influence of the position of the components on the excavation bucket on the tension force of the crawler crane based on the dynamic analysis of the barrette grab bucket during the excavation process. This helps determine the reasonable parameters of the barrette grab bucket according to the objective function of the minimum tension force of the crawler crane, providing a basis for selecting crawler cranes with appropriate lifting capacity to reduce construction costs.

Keywords:

The shape of the barrette grab bucket, The size of the digging bucket, The dynamic analysis of the barrette grab bucket, The reasonable parameters of the barrette grab bucket, and the minimum tension force of the crawler crane.

References:

[1] Hao Zhou, and Xinming Zhou, “Design and Application of the Grab Operation Test System,” 3rd International Conference on Material, Mechanical and Manufacturing Engineering, 2015.
[CrossRef] [Google Scholar] [Publisher Link]
[2] Haoran Sun et al., “Bucket Structure Optimization of Backhoe Hydraulic Excavator Based on Compound Digging Trajectory and Limit Digging Force,” Advances in Mechanical Engineering, vol. 14, no. 4, pp. 1–8, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[3] Ilya Tsipurskiy, “Determination of Parameters of the Bucket Grab for Excavation Works,” MATEC Web of Conferences, vol. 193, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[4] J. Maciejewski, A. Jarzebowski, and W. Trampczynski, “Study on the Efficiency of the Digging Process Using the Model of Excavator Bucket,” Journal of Terramechanics, vol. 40, no. 4, pp. 221–233, 2003.
[CrossRef] [Google Scholar] [Publisher Link]
[5] Ilya Tsipurskiy, “Modeling the Weight of a Grab Bucket for Digging,” MATEC Web of Conferences, vol. 251, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[6] Rohit Singh Karakoti, Saurabh Pandey, and Vaibhav Bist, “Concrete Damage Plasticity Model of Brazilian Tests On Concrete Cylinders With An Effect of Concrete Compressive Strength On The Nature of The Size Dependence,” SSRG International Journal of Civil Engineering, vol. 8, no. 6, pp. 28-37, 2021.
[CrossRef] [Publisher Link]
[7] Chang Xua et al., “Research on Monitoring Force of Steel Wire Rope of Grab Dredger Base on Wireless Sensing,” Procedia Engineering, vol. 174, pp. 385-391, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[8] Zhigui Ren et al., “Research on the Matching Characteristics of the Theoretical Digging Force of a Backhoe Hydraulic Excavator,” Scientific Report, 2022.
[CrossRef] [Google Scholar] [Publisher Link]
[9] Ilya Tsipurskiy, “Simulation Curves of Scooping and Digging Grab,” MATEC Web of Conferences, vol. 196, 2018.
[CrossRef] [Google Scholar] [Publisher Link]
[10] Khedkar Y, Dey T, and Padasalagi Y, “Study of Forces Acting on Excavator Bucket While Digging,” Journal of Applied Mechanical Engineering, vol. 6, no. 5, 2017.
[CrossRef] [Google Scholar] [Publisher Link]
[11] Li zhi Gu, and Tie Ming Xiang, “Grab Bucket Optimization Design Based on the Kinematics and Dynamics Analysis,” Applied Mechanics and Materials, vol. 184-185, 2012.
[CrossRef] [Google Scholar] [Publisher Link]
[12] Haoran Sun et al., “Integrated Expression and General Optimisation Method of Bucket Shape Line of Backhoe Hydraulic Excavator,” Journal of Mechanical Science and Technology, vol. 35, pp. 2543-2550, 2021.
[CrossRef] [Google Scholar] [Publisher Link]
[13] Wang Xian-long, Liang Qing-hua, and Guo Wei-zhong, “Static Analysis and Parameter Optimization of the Grab Bucket,” Applied Mechanics and Materials, vol. 130-134, 2012.
[CrossRef] [Google Scholar] [Publisher Link]
[14] N.G. Dombrovsky, M.I.Galperin Baumaschine, Moscow, Hohschule, 224, 1985.
[15] S. Hadi Suryo et al., “Analysis of Rake Angle Effect to Stress Distribution on Excavator Bucket Teeth Using Finite Element Method,” Civil Engineering Journal, vol. 3, no. 12, 2017.
[CrossRef] [Google Scholar] [Publisher Link]