Design & Analysis of Coil Spring using Different Material

International Journal of Mechanical Engineering

© 2018 by SSRG - IJME Journal

Volume 5 Issue 12

Year of Publication : 2018

Authors : D.Pravin, B.Adesh, Suresh Vellingiri

10.14445/23488360/IJME-V5I12P101

How to Cite?

D.Pravin, B.Adesh, Suresh Vellingiri, "Design & Analysis of Coil Spring using Different Material," SSRG International Journal of Mechanical Engineering, vol. 5,  no. 12, pp. 1-2, 2018. Crossref, https://doi.org/10.14445/23488360/IJME-V5I12P101

Abstract:

In vehicles, the issue occurs while driving on knocking street condition. This venture's goal is to structure and break down the execution of Shock safeguard by utilizing diverse material for curl spring. The Shock safeguard, which is one of the Suspension frameworks, is planned mechanically to deal with stun motivation and scatter dynamic vitality. It decreases the abundance of aggravations prompting increment in solace and enhanced ride quality. The spring is compacted immediately when the wheel strikes the knock. The packed spring bounces back to its typical measurement or ordinary stacked length, making the body be lifted. The spring goes down underneath its ordinary stature when the heaviness of the vehicle drives the spring down. This, thus, makes the spring bounce back once more. The spring bobbing process happens, again and again, every less each time, until the all over development at long last stops. The vehicle taking care of turns out to be extremely troublesome and prompts an awkward ride when ricocheting is uncontrolled.
Consequently, the planning of spring in a suspension framework is extremely urgent. The investigation is finished by considering bicycle mass, loads, and no. of people situated on bicycle individually. In this exploration paper, the point is to expand the solace level by estimating power transmission at both ends of the helical pressure spring and lessen the heaviness of safeguard by utilizing diverse composite material. Demonstrating and Analysis is finished utilizing CATIA V5 R21 and ANSYS 16.2.

Keywords:

Shock Absorber, Coil Spring, Modified design, Stress analysis

References:

[1] K Pavan Kumar, S Praveen Kumar, and G Guru Mahesh. " static Analysis of a primary suspension spring used in locomotive" IJMERR, Vol. 2, No. 4, October 2013
[2] Priyanka Ghate, Dr. Shankapal S. R., Monish Gowda M. H. "Failure Investigation of A Freight Locomotive Suspension Spring and Redesign of the Spring for Durability and Ride Index,"
[3] Mehdi Bakhshesh and Majid Bakhshesh "Optimization of Steel Helical Spring by Composite Spring" (2012)
[4] NK. Mukhopadhyay, B. Ravi Kumar, DK. Bhattacharya "Failure analysis of passenger car coil spring" (2006)
[5] P.S.Valsange Design of Helical Coil Compression Spring, IJERA, Vol. 2, 6, November-December 2012
[6] S.S.Gaikwad, P.S.Kachare, "Static Analysis of Helical Compression Spring Used in TwoWheeler Horn," IJEAT, Volume-2, February 2013
[7] Brita Pyttel, KK Ray, S. A. Kaoua" Investigation of probable failure position in helical compression springs used in fuel injection system of diesel engines" (IOSRJMCE)ISSN:2278-1684 Volume 2, Issue 3(Sep-Oct. 2012), PP 24-29
[8] Hsin-Tsun Hsu, Christopher Coker and Hubert Huang(2010), "Optimization of an electric vehicle suspension system using CAE," world electric vehicle journal, vol.4, pp. 179-183.
[9] B. Kaiser, B. Pyttel and C. Berger (2011), "Behavior of helical compression springs made of different materials," international journal of fatigue," vol. 33, pp.23-32
[10] Upendra S. Gupta, Sumit Chandak, Devashish Dixit "Design & Manufacturing of All-Terrain Vehicle (ATV)- Selection, Modification, Static & Dynamic Analysis of ATV Vehicle," International Journal of Engineering Trends and Technology (IJETT), V20(3),131-138 Feb 2015.
[11] L. Del Llano-Vizcaya, C. Rubio-Gonzalez &G.Mesmacque (2007), "Stress relief effect on fatigue and relaxation of compression springs," material and design, vol.28, pp.1130-1134