Citation :

Geoffrey Kubuli Makhanu, Obadiah Mwanzi Maube, Patrick Nziu, "Effect of Water Temperature, Contact Time and Particle Size on the Leaching Characteristics of Organic and Inorganic Matter from Sugarcane Trash Briquettes," International Journal of Mechanical Engineering, vol. 13, no. 10, pp. 95-107, 2026. Crossref, https://doi.org/10.14445/23488360/IJME-V13I10P108

Abstract

Global depletion of fossil fuels and the environmental costs of their use motivate renewable alternatives. Sugarcane trash is abundant but rich in potassium, silica, chlorine, and alkali/alkaline earth metals, which drive ash formation, slagging, fouling, corrosion, and hazardous air pollutants during combustion. This study evaluates water leaching as a pretreatment to reduce problematic inorganic/organic constituents and to improve combustion and emission performance of sugarcane trash briquettes. Raw cane trash (CO 421, Migori County) was collected, size-reduced (1, 5, 10 mm), and leached in ultrapure water at 25, 50, and 100 °C for 20, 40, and 60 min using a 3×3×3 full factorial design (27 runs; triplicates). Post-leach solids were densified via hydraulic press (18 MPa; DIN 54385:2016-08). Elemental and ash-forming species (K, Na, Ca, Mg, Si; Cl, S, P) were quantified by standard methods; leachates were analyzed for pH, EC, TOC, and organic acids. Leaching increased C from 46.27 to 49.73 wt% and eliminated detectable Cl; N and S decreased by 39.5% and 66.7%, respectively. Ash-forming K and Mg in solids fell by 63.09%and 44.00%, while Si declined slightly (≈4.3%) and Ca rose (≈15.9%). Leachates were mildly acidic (pH ≈ 5.5) and contained organic acids totaling 2.91% of TOC. Electrical conductivity trends and performance gains were strongest with smaller particle size, higher temperature, and longer contact time. The optimum temperature, time and size were 50 °C, 60-minute and 1 mm, respectively.

Keywords

Water leaching, Sugarcane trash, Biomass briquettes, Ash reduction.

References

1. Scott Q Turn et al., “Fuel Characteristics of Processed, High-Fiber Sugarcane,” Fuel Processing Technology, vol. 81, no. 1, pp. 35-55, 2003.
   [CrossRef] [Google Scholar] [Publisher Link]
2. Yu Wang, Kai Wu, and Yu Sun, “Effects of Raw Material Particle Size on the Briquetting Process of Rice Straw,” Journal of the Energy Institute, vol. 91, no. 1, pp. 153-162, 2018.
   [CrossRef] [Google Scholar] [Publisher Link]
3. Xinliang Liu, and Xiaotao T. Bi, “Removal of Inorganic Constituents from Pine Barks and Switchgrass,” Fuel Processing Technology, vol. 92, no. 7, pp. 1273-1279, 2011.
   [CrossRef] [Google Scholar] [Publisher Link]
4. Lei Deng, Tao Zhang, and Defu Che, “Effect of Water washing on Fuel Properties, Pyrolysis and Combustion Characteristics, and ash Fusibility of Biomass,” Fuel Processing Technology, vol. 106, pp. 712-720, 2013.
   [CrossRef] [Google Scholar] [Publisher Link]
5. Musti KS Sastry et al., “Biomass briquettes: A sustainable and environment Friendly Energy Option for the Caribbean,” Fifth International Symposium on Energy, Puerto Rico Energy Center, 2013.
   [Google Scholar]
6. Peter Thy et al., “Inorganic Composition and Environmental Impact of Biomass Feedstock,” Energy & Fuels, vol. 27, no. 7, pp. 3969-3987, 2013.
   [CrossRef] [Google Scholar] [Publisher Link]
7. Murari Mohon Roy, and Kenny W. Corscadden, “An Experimental Study of Combustion and Emission of Biomass Briquette in a Domestic Wood Stove,” Applied Energy, vol. 99, pp. 206-212, 2012.
   [CrossRef] [Google Scholar] [Publisher Link]
8. Sui Boon Liaw, and Hongwei Wu, “Leaching Characteristics of Organic and Inorganic Matter from Biomass by Water: Differences between Batch and Semi-Continuous Operations,” Industrial & Engineering Chemistry Research, vol. 52, no. 11, pp. 4280-4289, 2013.
   [CrossRef] [Google Scholar] [Publisher Link]
9. J.H. Zhou, C.S. Cheung, and C.W. Leung, “Combustion, Performance, Regulated and Unregulated Emissions of a Diesel Engine with Hydrogen Addition,” Applied Energy, vol. 126, pp. 1-12, 2014.
   [CrossRef] [Google Scholar] [Publisher Link]
10. Christian L'Orange, John Volckens, and Morgan DeFoort, “Influence of Stove Type and Cooking Pot Temperature on Particulate Matter Emissions from Biomass Cook Stoves,” Energy for Sustainable Development, vol. 16, no. 4, pp. 448-455, 2012.
    [CrossRef] [Google Scholar] [Publisher Link]
11. C. Yu et al., “Influence of Leaching Pretreatment on Fuel Properties of Biomass,” Fuel Processing Technology, vol. 128, pp. 43-53, 2014.
    [CrossRef] [Google Scholar] [Publisher Link]
12. Paulien Harmsen et al., “Literature Review of Physical and Chemical Pretreatment Processes for Lignocellulosic Biomass,” Biomass, Report, 1-49, 2010.
    [Google Scholar]
13. K.L. Chin et al., “Reducing ash Related Operation Problems of Fast Growing Timber Species and Oil Palm Biomass for Combustion Applications using Leaching Techniques,” Energy, vol. 90, pp. 622-630, 2015.
    [CrossRef] [Google Scholar] [Publisher Link]
14. Prabahar Ravichandran, Duncan Gibb, and Kenneth Corscadden, “Controlled Batch Leaching Conditions for Optimal Upgrading of Agricultural Biomass,” Journal of Sustainable Bioenergy Systems, vol. 3, no. 3, pp. 186-193, 2013.
    [CrossRef] [Google Scholar] [Publisher Link]
15. Shibo Wu et al., “Effects of Water Leaching on the ash Sintering Problems of Wheat Straw,” Energies, vol. 12, no. 3, pp. 1-14, 2019.
    [CrossRef] [Google Scholar] [Publisher Link]
16. C.A. Ogden et al., “In-Field Direct Combustion Fuel Property Changes of Switchgrass Harvested from Summer to Fall,” Fuel Processing Technology, vol. 91, no. 3, pp. 266-271, 2010.
    [CrossRef] [Google Scholar] [Publisher Link]
17. Hongwei Wu et al., “Removal and Recycling of Inherent Inorganic Nutrient Species in Mallee Biomass and Derived Biochars by Water Leaching,” Industrial & Engineering Chemistry Research, vol. 50, no. 21, pp. 12143-12151, 2011.
    [CrossRef] [Google Scholar] [Publisher Link]
18. Yasas Wishvajith Bandara, Pringa Gamage, and Duleeka Sandamali Gunarathne, “Hot Water Washing of Rice Husk for Ash Removal: The Effect of Washing Temperature, Washing Time and Particle Size,” Renewable Energy, vol. 153, pp. 646-652, 2020.
    [CrossRef] [Google Scholar] [Publisher Link]
19. Jinxia Fu et al., “Water Leaching for Improving fuel Properties of Pongamia Pod: Informing Process Design,” Fuel, vol. 305, pp. 1-13, 2021.
    [CrossRef] [Google Scholar] [Publisher Link]
20. “EPA Course 345: Emission Capture and Gas Handling System Inspection,” U.S. Environmental Protection Agency, 1993.
    [Publisher Link]
21. N. Said et al., “Effect of Water Washing on the Thermal Behavior of Rice Straw,” Waste Management, vol. 33, no. 11, pp. 2250-2256, 2013.
    [CrossRef] [Google Scholar] [Publisher Link]