Comparison of Theoretical and Experimental Overall Heat Transfer Coefficient for Acetic Acid –Water System in Spiral Heat Exchanger


International Journal of Thermal Engineering
© 2018 by SSRG - IJTE Journal
Volume 4 Issue 3
Year of Publication : 2018
Authors : R.W.Tapre, Dr.J.P.Kaware
pdf
How to Cite?

R.W.Tapre, Dr.J.P.Kaware, "Comparison of Theoretical and Experimental Overall Heat Transfer Coefficient for Acetic Acid –Water System in Spiral Heat Exchanger," SSRG International Journal of Thermal Engineering, vol. 4,  no. 3, pp. 1-4, 2018. Crossref, https://doi.org/10.14445/23950250/IJTE-V4I3P101

Abstract:

In this paper detail study carried out by performing experiments for comparison of theoretical and experimental overall heat transfer coefficients. Initially designing of spiral heat exchanger was done and then fabricated. Cold fluid is acetic acid water miscible fluid is passed through shell side while hot fluid water is passed through tube side. Experiments were performed where hot fluid mass flow rate was kept constant and cold fluid mass flow rate was varied. From the result obtained comparison of overall heat transfer coefficient experimentally and theoretically.

Keywords:

Spiral heat exchanger, Theoretical overall heat transfer coefficient, Experimental overall heat transfer coefficient.

References:

[1] Manoj V. , Dr. Gopal and Dr. Senthilkumar, “ Heat Transfer Enhancement by using Nanofluid in Spiral Plate Heat Exchanger” International Journal of Engineering Research and Technology, Vol. 5, pp. 101-105, Issue 06, June-2016.
[2] M.D.Kathir Kaman, A. Sathishkumar, C. Balasuthagar, S. Ponsankar, “Design and Analysis of Spiral Plate Heat Exchnager for Cooling Applications”Journal of Chemical and Pharmaceutical Sciences,Vol. 10,pp. 511-514, Print ISSN: 0974-2115, January – March 2017. 
[3] G.N.Deshpande and N. V. Sali, “Experimental Investigation of Performance of Spiral Coil in Spiral Tube Heat Exchanger” Applied Mechanics and Materials, Vol. 592-594, pp 1564-1569,July 2014. 
[4] Susheel S.Pote1, Prasad P.Kulkarni, “Review of Experiment on Spiral Heat Exchanger” International Journal For Innovative Research In Multidisciplinary Field, ISSN – 2455-0620, Volume - 2, Issue - 8, Aug 2016. 
[5] Ping Cai, Lijun Zhao, Juan Liu and Songtao Kong, “Study on Inhomogeneity of Heat Transfer in Tube-Side for Spiral-Wound Heat Exchanger” Journal of Chemical and Pharmaceutical Research,Volume 6,Issue 7, pp-449-454, 2014. 
[6] Petro Kapustenko, Gennadiy Khavin, Oleksandr Perevertaylenkor, Olga Arsenyeva, “Plate and Spiral Heat Exchangers for Wet Phosphoric Acid Production Processes” 17th European Symposium on Computer Aided Process Engineering – ESCAPE17,May 2007. 
[7] Nikhil Lokhande, Dr. S. R. Nikam, Dr. K.N. Patil, Nikhil Lokhande, Dr. S. R. Nikam, Dr. K.N. Patil, “ Comparative Analysis Of Spiral Heat Exchanger And Gasketed Plate Type Heat Exchanger” Journal of Emerging Technologies and Innovative Research,Volume 4, Issue 10,pp. 67-75, October 2017. 
[8] A.B.Jarzbski, “Dimensioning of Spiral Heat Exchangers to Give Minimum Costs” Journal of Heat Transfer, Vol. 106, pp. 633-637 August 1984. 
[9] R.W.Tapre, Dr. J. P. Kaware, “Heat Transfer Characteristic of Spiral Heat Exchanger: Effect of Reynolds Number on Heat Transfer Coefficient for Acetic Acid - Water System,” International Journal of Scientific Research in Science and Technology, Volume 4, Issue 8, 2018. 
[10] R.W.Tapre, Dr. J. P. Kaware, “Experimental Analysis of Spiral Heat Exchanger: Evaluation of Reynolds Number and Nusselt Number for Acetic Acid – Water System,” International Journal of Scientific Research in Science and Technology, Volume 4, Issue 9, 2018. 
[11] R.W.Tapre, Dr. J. P. Kaware, “Experimental Study of the Effect of the Reynolds Number on Overall Heat Transfer Coefficient in Spiral Heat Exchanger for Acetic Acid – Water System” SSRG International Journal of Chemical Engineering Research Volume 5, Issue 2, May to Aug 2018.