Call For Paper October 2026
Research Article | Open Access | Download PDF
Volume 13 | Issue 10 | Year 2026 | Article Id. IJME-V13I10P106 | DOI : https://doi.org/10.14445/23488360/IJME-V13I10P106

Microstructural Evolution and Mechanical Performance of Al6061-WC Composites Fabricated via Powder Metallurgy

Akshay Koli, Amol Gulabrao Kamble, Sandip H. Mane

Received Revised Accepted Published
08 Jul 2026 04 Oct 2026 15 Oct 2026 26 Oct 2026

Citation :

Akshay Koli, Amol Gulabrao Kamble, Sandip H. Mane, "Microstructural Evolution and Mechanical Performance of Al6061-WC Composites Fabricated via Powder Metallurgy," International Journal of Mechanical Engineering, vol. 13, no. 10, pp. 65-81, 2026. Crossref, https://doi.org/10.14445/23488360/IJME-V13I10P106

Abstract

Aluminium Matrix Composites (AMCs) are gaining interest for high-performance structural applications because they provide a higher Strength-to-Weight Ratio than conventional materials and superior Wear Resistance. Nevertheless, limitations like Dispersion of Reinforcement Particles, Interfacial Bonding, and Property Trade-offs hindered the broad use of these materials. In this study, the Fabrication and Characterization of an Aluminium composite based on Al6061, with Tungsten Carbide (WC) Particle Reinforcement using Powder Metallurgy (PM) and Controlled Atmosphere Sintering, is investigated. The effect of added varying percentages (0, 3, 6, 9, and 12 wt%) of WC particles to Al6061 on the Microstructural Characteristics and Mechanical Properties of the Al6061-WC Composite was investigated to optimize the optimum level of pre-milled nano-WC particles. Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and X-ray Diffraction (XRD) were used to confirm that the improvement in Particle Distribution and Phase Stability of the Al6061-WC Composite is directly related to the percentage of WC. Additionally, Mechanical Testing demonstrated that the mean Ultimate Tensile Strength (UTS) (151 MPa - 326 MPa) significantly improves with WC addition; however, Ductility and Impact Strength decrease due to an increase in Brittle Behaviour. Therefore, results clearly show that there is a Direct Relationship Between Strength and Ductility depending on the Content of Reinforcing Material and Quality of Interface. Analysis of Variance (ANOVA) was performed to check the data for significance, which showed a marked improvement for all properties, with a p-value of < 0.0001. As such, this investigation has provided new knowledge regarding the optimization of Reinforcing Levels to achieve Enhanced Mechanical Performance in Al-Based Composites for Aerospace and Automotive Applications.

Keywords

Aluminium matrix composites, Tungsten carbide, Powder metallurgy, Mechanical properties, Microstructure.

References

  1. Samson Jerold Samuel Chelladurai et al., “A Review on Mechanical Properties and Wear Behaviour of Aluminium based Metal Matrix Composites,” Materials Today: Proceedings, vol. 37, pp. 908-916, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  2. Harish Munnur et al., “Characterization & Tribological Behaviour of Aluminium Metal Matrix Composites – A Review,” Materials Today: Proceedings, vol. 47, pp. 2570-2574, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  3. S.J.S. Chelladurai, and R. Arthanari, “Prediction of the Hardness of Stir Cast LM13 Aluminium Alloy‐Copper Coated Short Steel Fiber Reinforced Composites using Response Surface Methodology,” Materials Science & Engineering Technology, vol. 51, no. 2, pp. 221-229, 2020.
    [    CrossRef] [Google Scholar] [Publisher Link]
  4. Samson Jerold Samuel Chelladurai et al., “Investigation of Mechanical Properties and Dry Sliding Wear Behaviour of Squeeze Cast LM6 Aluminium Alloy Reinforced with Copper Coated Short Steel Fibers,” Transactions of the Indian Institute of Metals, vol. 71, no. 4, pp. 813-822, 2018.
    [    CrossRef] [Google Scholar] [Publisher Link]
  5. Samson Jerold Samuel Chelladurai et al., “Effect of Copper Coating and Reinforcement Orientation on Mechanical Properties of LM6 Aluminium Alloy Composites Reinforced with Steel Mesh by Squeeze Casting,” Transactions of the Indian Institute of Metals, vol. 71, no. 5, pp. 1041-1048, 2018.
    [    CrossRef] [Google Scholar] [Publisher Link]
  6. Samson Jerold Samuel C et al., “Investigation of the Mechanical Properties of a Squeeze-Cast LM6 Aluminium Alloy Reinforced with a Zinc-Coated Steel-Wire Mesh,” Materials and Technologies, vol. 52, no. 2, pp. 125-131, 2018.
    [    CrossRef] [Google Scholar] [Publisher Link]
  7. Samson Jerold Samuel Chelladurai, and Ramesh Arthanari, “Effect of Stir Cast Process Parameters on Wear behavior of Copper Coated short Steel Fibers Reinforced LM13 Aluminium Alloy Composites,” Materials Research Express, vol. 5, no. 6, 2018.
    [    Google Scholar] [Publisher Link]
  8. Manish Shukla et al., “Characteristic behaviour of Aluminium Metal Matrix Composites: A Review,” Materials Today: Proceedings, vol. 5, no. 2, pp. 5830-5836, 2018.
    [    CrossRef] [Google Scholar] [Publisher Link]
  9. Vineet Chak, Himadri Chattopadhyay, and T. L. Dora, “A Review on Fabrication Methods, Reinforcements and Mechanical Properties of Aluminum Matrix Composites,” Journal of Manufacturing Processes, vol. 56, pp. 1059-1074, 2020.
    [    CrossRef] [Google Scholar] [Publisher Link]
  10. Mandeep Singh, Deepak Bhandari, and Khushdeep Goyal, “A Review of the Mechanical Performance of Nanoparticles Reinforced Aluminium Matrix Nanocomposites,” Materials Today: Proceedings, vol. 46, pp. 3198-3204, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  11. P. Chakrapani, and T.S.A. Suryakumari, “Mechanical Properties of Aluminium Metal Matrix Composites-A Review,” Materials Today: Proceedings, vol. 45, pp. 5960-5964, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  12. Z.J. Wang, Z. Zheng, and M.W. Fu et al, “Aluminium Matrix Composites: Structural Design and Microstructure Evolution in the Deformation Process,” Journal of Materials Research and Technology, vol. 30, pp. 3724-3754, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  13. Wei Yu et al., “Texture Evolution, Segregation Behavior, and Mechanical Properties of 2060 Al-Li (Aluminium-Lithium) Composites Reinforced by TiC (Titanium Carbide) Nanoparticles,” Composites Part B: Engineering, vol. 255, pp. 1-49, 2023. 
    [    CrossRef] [Google Scholar] [Publisher Link]
  14. Riccardo Casati, and Maurizio Vedani, “Metal Matrix Composites Reinforced by Nano-Particles—A Review,” Metals, vol. 4, no. 1, pp. 65-83, 2014.
    [    CrossRef] [Google Scholar] [Publisher Link]
  15. P. Karuppusamy et al., “A Study on Mechanical Properties of Tungsten Carbide Reinforced Magnesium Metal Matrix Composites for the Application of a Piston,” International Journal of Lightweight Materials and Manufacture, vol. 4, no. 4, pp. 449-459, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  16. M. Rajaram Narayanan, and S. Nallusamy, “Experimental Analysis of Aluminium Alloy Metal Matrix Composite with Tungsten Carbide by In-Situ Method Using SEM,” Rasayan Journal of Chemistry, vol. 11, no. 1, pp. 355-360, 2018.
    [    CrossRef] [Google Scholar] [Publisher Link]
  17. Sarvadey Ashwin Kumar et al., “Review on Development, Nanoparticle Reinforcement and Sustainable Materials for Enhancement of Mechanical Properties in Aluminium Hybrid Metal Matrix Composites,” E3S Web of Conferences, vol. 552, pp. 1-11, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  18. P. Anand et al., “Enhancement of Mechanical Characterization of Aluminum Alloy with Tungsten Carbide Metal Matrix Composite by Particulate Reinforcements,” Materials Today: Proceedings, vol. 46, pp. 3690-3692, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  19. K. Ravikumar, K. Kiran, and V.S. Sreebalaji, “Characterization of Mechanical Properties of Aluminium/Tungsten Carbide Composites,” Measurement, vol. 102, pp. 142-149, 2017.
    [    CrossRef] [Google Scholar] [Publisher Link]
  20. Waqas Farid et al., “Integrating Experimental and Computational Analyses for Mechanical Characterization of Titanium Carbide/Aluminum Metal Matrix Composites,” Materials, vol. 17, no. 9, pp. 1-26, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  21. Jovana Krstić et al., “Application of Metal Matrix Nanocomposites in Engineering,” Advanced Engineering Letters, vol. 3, no. 4, pp. 180-190, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  22. Mahmoud E. Abdullah et al., “Evaluating the Microstructural and Mechanical Properties of TiO2/AA7075 Metal Matrix Nanocomposite via Friction Stir Processing,” The International Journal of Advanced Manufacturing Technology, vol. 137, no. 9-10, pp. 4741-4760, 2025.
    [    CrossRef] [Google Scholar] [Publisher Link]
  23. Jeffin Johnson, and Rosari Raja, “Evaluation of the Effect of Strontium and Tungsten Carbide on the Microstructure Evolution, Tribological and Mechanical behaviour of Al-Zn-Mg-Cu-5Sr-WC Metal Matrix Composite,” Journal of Metals, Materials and Minerals, vol. 34, no. 2, pp. 1-13, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  24. D. Sudarsan, A. Bovas Herbert Bejaxhin, and S. Raj Kumar, “Investigation of Mechanical and Tribological Properties of Aluminum Metal Matrix Hybrid Nanocomposites Reinforced with Alumina and Titanium Carbide Nanoparticles,” Journal of Environmental Nanotechnology, vol. 13, no. 2, pp. 315-321, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  25. P. Vijay et al., “Effect of Tungsten Carbide on Al6061/SiC Hybrid Metal Matrix Composites,” Composites Theory and Practice, vol. 21, no. 4, 169-180, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  26. N.G. Guruchannabasavaiah et al., “Investigation on the Microstructure and Mechanical Properties of Aluminium 7075 Reinforced with Different Weight Percentage of Tungsten Carbide and Cobalt Metal Matrix Hybrid Composites,” IOP Conference Series: Materials Science and Engineering: International Conference on “Futuristic Trends in Mechanical Engineering, Bengaluru, India, vol. 1013, pp. 1-7, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  27. Navya Thirumaleshwar Hegde, Dayananda Pai, and Ramakrishna Hegde et al., “Heat Treatment and Mechanical Characterization of LM-25/Tungsten Carbide Metal Matrix Composites,” Materials Today: Proceedings, vol. 19, pp. 810-817, 2019.
    [    CrossRef] [Google Scholar] [Publisher Link]
  28. Samson Jerold Samuel Chelladurai, and Arthanari Ramesh, “Investigation on Mechanical and Wear Properties of Zinc-Coated Steel Wires Reinforced LM6 Aluminium Alloy Composites by Squeeze Casting,” Surface Review and Letters, vol. 26, no. 1, 2019.
    [    CrossRef] [Google Scholar] [Publisher Link]
  29. Samson Jerold Samuel Chelladurai et al., “Optimisation of Dry Sliding Wear Parameters of Squeeze Cast AA336 Aluminium Alloy: Copper-Coated Steel Wire-Reinforced Composites by Response Surface Methodology,” International Journal of Metalcasting, vol. 13, no. 2, pp. 354-366, 2019.
    [    CrossRef] [Google Scholar] [Publisher Link]
  30. A. Anish, and M. Ananth Kumar, “Characterization of an Aluminium Matrix Reinforced with Tungsten Carbide and Molybdenum Disulfide Hybrid Composite,” IOP Conference Series: Materials Science and Engineering: 2nd International Conference on Advances in Mechanical Engineering, Kattankulathur, India, vol. 402, no. 1, pp. 1-9, 2018.
    [    CrossRef] [Google Scholar] [Publisher Link]
  31. Samson Jerold Samuel Chelladurai et al., “Investigation on Mechanical Properties and Wear Behaviour of Squeeze Cast LM13 Aluminium Alloy Reinforced with Copper Coated Steel Wires,” Journal of Physical Chemistry, vol. 232, no. 12, pp. 1787-1806, 2018.
    [    CrossRef] [Google Scholar] [Publisher Link]
  32. Nishanth Pasupathy, “Development and Testing the Properties of Hybrid Composite using Aluminium 6061 with TiC and Graphene,” Thesis, University of Windsor, pp. 1-65, 2021.
    [    Google Scholar] [Publisher Link]
  33. Cao Fenghong et al., “Effects of Silicon Carbide and Tungsten Carbide in Aluminium Metal Matrix Composites,” Silicon, vol. 11, no. 6, pp. 2625-2632, 2019.
    [    CrossRef] [Google Scholar] [Publisher Link]
  34. M.V. Phanibhushana, C.N. Chandrappa, and H.B. Niranjan, “Evaluation of Mechanical Properties of Al6061 Reinforced with Hematite,” Journal of Multidisciplinary Engineering Science and Technology, vol. 2, no. 1, pp. 255-260, 2015.
    [    Google Scholar] [Publisher Link]
  35. T. Venkat Kishore, “Al 7075 Reinforced with WC Metal Matrix Composites,” Journal of Science & Technology (JST), vol. 4, no. 2, pp. 45-50, 2019.
    [    CrossRef] [Google Scholar] [Publisher Link]
  36. Prem Ranjan et al., “Formation of Tungsten Carbide Nanoparticles by Wire Explosion Process,” International Journal of Applied Ceramic Technology, vol. 17, no. 1, pp. 304-310, 2020.
    [CrossRef] [Google Scholar] [Publisher Link]
  37. Joseph I. Goldstein et al., Scanning Electron Microscopy and X-Ray Microanalysis, 4th ed., Springer, pp. 1-550, 2018.
    [CrossRef] [Google Scholar] [Publisher Link]
  38. Deepak M Shinde, Prasanta Sahoo, and J Paulo Davim, “Tribological Characterization of Particulate-Reinforced Aluminum Metal Matrix Nanocomposites: A Review,” Advanced Composites Letters, vol. 29, pp. 1-28, 2020.
    [    CrossRef] [Google Scholar] [Publisher Link]
  39. Benjamin A. Bedard et al., “Microstructure and Micromechanical Response in Gas-Atomized Al 6061 Alloy Powder and Cold-Sprayed Splats,” Journal of Thermal Spray Technology, vol. 27, no. 8, pp. 1563-1578, 2018.
    [    CrossRef] [Google Scholar] [Publisher Link]
  40. Chaolun Liang et al., “Transmission Electron Microscopy Analysis of Some Transition Metal Compounds for Energy Storage and Conversion,” TrAC Trends in Analytical Chemistry, vol. 90, pp. 62-79, 2017.
    [    CrossRef] [Google Scholar] [Publisher Link]
  41. R.F. Egerton, Physical Principles of Electron Microscopy: An Introduction to TEM, SEM, and AEM, 2nd ed., Springer, pp. 1-196, 2016.
    [    CrossRef] [Google Scholar] [Publisher Link]
  42. Oleg Matvienko et al., “Investigation of Stresses Induced Due to the Mismatch of the Coefficients of Thermal Expansion of the Matrix and the Strengthening Particle in Aluminum-Based Composites,” Metals, vol. 11, no. 2, pp. 1-20, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  43. Xiaoshuang Rao et al., “Characterization of Hardness, Elastic Modulus and Fracture Toughness of RB-SiC Ceramics at Elevated Temperature by Vickers Test,” Materials Science and Engineering: A, vol. 744, pp. 426-435, 2019.
    [    CrossRef] [Google Scholar] [Publisher Link]
  44. A. Devaenthiran Pradeep, and Thirupathi Rameshkumar, “Effect of Heat Treatment on Metallurgical and Mechanical Properties of an Aluminium 6061 Hybrid Composite,” Materials and Technology, vol. 58, no. 5, pp. 555-560, 2026.
    [    CrossRef] [Google Scholar] [Publisher Link]