Call For Paper October 2026
Research Article | Open Access | Download PDF
Volume 13 | Issue 10 | Year 2026 | Article Id. IJME-V13I10P110 | DOI : https://doi.org/10.14445/23488360/IJME-V13I10P110

Thermo-Physical and Mechanical Characterisation of Pumice-Kaolin Composite Refractories with Multi-Objective Optimisation for Thermal Insulation Applications

James Audu, Abdulrahman Asipita Salawu, Muriana Rasheed Aremu, Abdullahi Aliyu Alhaji, Lawal Sadiq Sius

Received Revised Accepted Published
21 Aug 2026 14 Oct 2026 20 Oct 2026 26 Oct 2026

Citation :

James Audu, Abdulrahman Asipita Salawu, Muriana Rasheed Aremu, Abdullahi Aliyu Alhaji, Lawal Sadiq Sius, "Thermo-Physical and Mechanical Characterisation of Pumice-Kaolin Composite Refractories with Multi-Objective Optimisation for Thermal Insulation Applications," International Journal of Mechanical Engineering, vol. 13, no. 10, pp. 139-157, 2026. Crossref, https://doi.org/10.14445/23488360/IJME-V13I10P110

Abstract

Pumice-kaolin composites were produced from Nigerian raw materials to examine how pumice content (25, 50 and 75 wt%) and pumice particle size (75, 150 and 300 μm) affect the balance between thermal insulation and strength in fired refractories. A two-factor Taguchi L9 design was used, and all specimens were fired at 1200 °C for 1 h. Bulk density ranged from 1.44 to 2.00 g/cm3, as-fired flexural strength from 0.18 to 0.95 MPa and apparent thermal conductivity at a nominal 1000 °C from 1.33 to 1.68 W/m·K. Two formulations failed an apparent specific gravity check and were excluded from the analyses that use porosity or bulk density. No test cone deformed up to a kiln temperature of 1200 °C. Particle size governed thermal conductivity (85.8% contribution, p = 0.001). Grey relational analysis of the seven retained runs gave the highest grade to 25 wt% pumice with 75 μm particles (0.734; first in ten of thirteen sensitivity scenarios), and factor-level analysis placed the preferred region at 25 wt% pumice with 75 to 150 μm particles. The composites do not meet ASTM C155 limits for insulating firebrick, and their use as backup lining requires confirmation by replicated, load and service tests.

Keywords

Composite refractories, Grey Relational Analysis, Pumice-kaolin, Taguchi design, Thermal insulation.

References

  1. Kiyoshi Sugita, “Historical Overview of Refractory Technology in the Steel Industry,” Nippon Steel Technical Report, no. 98, pp. 1-10, 2008.
    [    Google Scholar] [Publisher Link]
  2. B.M. Thethwayo, and J.D. Steenkamp, “A Review of Carbon-Based Refractory Materials and their Applications,” Journal of the Southern African Institute of Mining and Metallurgy, vol. 120, no. 11, pp. 641-650, 2020.
    [    CrossRef] [Google Scholar] [Publisher Link]
  3. Reynaert Camille, Sniezek Edyta, and Szczerba Jacek, “Corrosion Tests for Refractory Materials Intended for the Steel Industry,” Ceramics-Silikaty, vol. 64, no. 3, pp. 278-288, 2020.
    [    CrossRef] [Google Scholar] [Publisher Link]
  4. S. Kamara, “A Summarized Review of Refractory Materials and their Chemical Components,” American Journal of Chemistry and Pharmacy, vol. 4, no. 1, pp. 37-47, 2025.
    [    CrossRef] [Google Scholar] [Publisher Link]
  5. Subir Biswas, Refractory Materials: Processing, Properties and Applications, 1st ed., Allied Publishers, 2022.
    [    Google Scholar] [Publisher Link]
  6. Arup Ghosh, Somnath Sinhamahapatra, and Himansu Sekhar Tripathi, Refractories as Advanced Structural Materials for High Temperature Processing Industries, Future Landscape of Structural Materials in India, pp. 279-292, 2022.
    [    CrossRef] [Google Scholar] [Publisher Link]
  7. Mohamed Lokman Jalaluddin et al., “A Review of Pore-Forming Agents on the Structures, Porosities, and Mechanical Properties of Porous Ceramics,” AIMS Materials Science, vol. 11, no. 4, pp. 634-665, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  8. Chinwuba Victor Ossia, and Mathew Uzoma Shedrack, “Optimization of Blast Furnace Throughput Based on Hearth Refractory Lining,” Journal of Casting and Materials Engineering, vol. 5, no. 1, pp. 5-13, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  9. Oluwagbenga Peter Odewole, and Emmanuel Majiyebo Alemaka, “Development of Aluminosilicate Refractory Crucibles from Awo Quartz and Ikere Ekiti Clays,” Journal of Science, Technology and Education, vol. 7, no. 2, pp. 1-10, 2019.
    [    Publisher Link]
  10. Peter Oluwagbenga Odewole, Isah Bolaji Kashim, and Tolulope Lawrence Akinbogun, “Production of Refractory Porcelain Crucibles from Local Ceramic Raw Materials using Slip Casting,” International Journal of Engineering and Manufacturing, vol. 9, no. 5, pp. 56-69, 2019.
    [    CrossRef] [Google Scholar] [Publisher Link]
  11. P.O. Atanda, O.O. Oluwole, and T.A. Oladeji, “Electrical Porcelain Production from Selected Kaolin Deposits in South Western Nigeria using Slip Casting,” International Journal of Materials and Chemistry, vol. 2, no. 3, pp. 86-89, 2012.
    [    CrossRef] [Google Scholar] [Publisher Link]
  12. Oladimeji Rabiu Ishola, “Effect of Additives on Refractory Properties of Some Selected Clay Deposits in Niger State, Nigeria,” Masters Theses, Federal University of Technology, pp. 1-100, 2022.
    [    Google Scholar] [Publisher Link]
  13. Eugenia Obidiegwu, Henry E. Mgbemere, and Arhuere O. Akporehe, “The Study of Insulating Properties of Refractory Bricks Produced using Melon Seed Husks as Pore Former,” Kufa Journal of Engineering, vol. 15, no. 2, pp. 61-73, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  14. Chigbo A. Mgbemene, Esther T. Akinlabi, and Omolayo M. Ikumapayi, “Dataset Showing Thermal Conductivity of South-Eastern Nigerian Kaolinite Clay Admixtures with Sawdust and Iron Filings for Fired-Bricks Production,” Data in Brief, vol. 27, pp. 1-10, 2019.
    [    CrossRef] [Google Scholar] [Publisher Link]
  15. Alaa M. Rashad, “A Short Manual on Natural Pumice as a Lightweight Aggregate,” Journal of Building Engineering, vol. 25, 2019.
    [    CrossRef] [Google Scholar] [Publisher Link]
  16. Mineral Commodity Summaries 2020, U.S. Geological Survey, 2020.
    [    CrossRef] [Google Scholar] [Publisher Link]
  17. Fatemeh Mobasheri et al., “Durability and Mechanical Properties of Pumice-based Geopolymers: A Sustainable Material for Future,” Iranian Journal of Science and Technology, Transactions of Civil Engineering, vol. 46, no. 1, pp. 223-235, 2022.
    [    CrossRef] [Google Scholar] [Publisher Link]
  18. Karan Moolchandani, “Advancements in Pumice-Based Concrete: A Comprehensive Review,” Next Materials, vol. 8, pp. 1-13, 2025.
    [    CrossRef] [Google Scholar] [Publisher Link]
  19. Maria Nomikou et al., “Master Floor: The New Application of Pumice Stone as Lightweight Floor Filling Material,” Materials Proceedings, vol. 5, no. 1, pp. 1-4, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  20. Agnieszka Przybek et al., “Thermal Properties of Geopolymer Concretes with Lightweight Aggregates,” Materials, vol. 18, no. 13, pp. 1-30, 2025.
    [    CrossRef] [Google Scholar] [Publisher Link]
  21. Abdullah M. Zeyad, and Ali Almalki, “Role of Particle Size of Natural Pozzolanic Materials of Volcanic Pumice: Flow Properties, Strength, and Permeability,” Arabian Journal of Geosciences, vol. 14, no. 2, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  22. Osman Gencel, “Characteristics of Fired Clay Bricks with Pumice Additive,” Energy and Buildings, vol. 102, pp. 217-224, 2015.
    [    CrossRef] [Google Scholar] [Publisher Link]
  23. Fatih Koçyiğit et al., “Thermo-Physical and Mechanical Properties of Clay Bricks Produced for Energy Saving,” International Journal of Thermophysics, vol. 43, no. 2, 2022.
    [    CrossRef] [Google Scholar] [Publisher Link]
  24. W.E. Lee et al., “Mullite Formation in Clays and Clay-Derived Vitreous Ceramics,” Journal of the European Ceramic Society, vol. 28, no. 2, pp. 465-471, 2008.
    [    CrossRef] [Google Scholar] [Publisher Link]
  25. H. Schneider, J. Schreuer, and B. Hildmann, “Structure and Properties of Mullite: A Review,” Journal of the European Ceramic Society, vol. 28, no. 2, pp. 329-344, 2008.
    [    CrossRef] [Google Scholar] [Publisher Link]
  26. C.Y. Chen, G.S. Lan, and W.H. Tuan, “Microstructural Evolution of Mullite during the Sintering of Kaolin Powder Compacts,” Ceramics International, vol. 26, no. 7, pp. 715-720, 2000.
    [    CrossRef] [Google Scholar] [Publisher Link]
  27. Alima Mebrek et al., “Development of Composite Ceramics with Kaolin and Spent Refractory Bricks,” JOM, vol. 75, no. 12, pp. 5808-5818, 2023.
    [    CrossRef] [Google Scholar] [Publisher Link]
  28. Amadou Pountouenchi et al., “Characterization of Refractory Bricks from Selected Cameroonian Kaolins,” Clay Minerals, vol. 58, no. 4, pp. 353-363, 2023.
    [    CrossRef] [Google Scholar] [Publisher Link]
  29. Jagadiswar Reddy Tippi Reddy, Jens Schuster, and Yousuf Pasha Shaik, “Development of Kaolin and Glass Fiber Reinforced Composites for Thermal Insulating Panels,” Open Journal of Composite Materials, vol. 14, no. 1, pp. 44-59, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  30. David S. Smith et al., “Thermal Conductivity of Porous Materials,” Journal of Materials Research, vol. 28, no. 17, pp. 2260-2272, 2013.
    [    CrossRef] [Google Scholar] [Publisher Link]
  31. Ya-Wen Lin et al., “Characteristics of Functional Water Retaining Porous Ceramics Prepared from Waste Diatomite and Waste Ceramics Tiles,” Ceramics International, vol. 50, no. 5, pp. 8065-8072, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  32. Anna Szymczak-Graczyk et al., “Application of Experimental Studies of Humidity and Temperature in the Time Domain to Determine the Physical Characteristics of a Perlite Concrete Partition,” Materials, vol. 17, no. 19, pp. 1-21, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  33. Bianlei Hao et al., “Heat Transfer Mechanism and Performance Optimization Scheme of Refractory Oxide Solid Heat Storage Materials,” Ceramics International, vol. 50, no. 12, pp. 21686-21694, 2024.
    [    CrossRef] [Google Scholar] [Publisher Link]
  34. Phillip J. Ross, Taguchi Techniques for Quality Engineering Loss Function, Orthogonal Experiments, Parameter and Tolerance Design, 2nd ed., McGraw-Hill, New York, 1996.
    [    Google Scholar] [Publisher Link]
  35. Douglas C. Montgomery, Design and Analysis of Experiments, 9th ed., John Wiley and Sons, pp. 1-630, 2017.
    [    Google Scholar] [Publisher Link]
  36. Deng Julong, “Introduction to Grey System Theory,” The Journal of Grey System, vol. 1, no. 1, pp. 1-24, 1989.
    [    Google Scholar] [Publisher Link]
  37. S. A. J. Al-Sultani, I. A. Disher Al-Hydary, and M. A. Ahmed Al-dujaili, “Taguchi-Grey Relational Analysis for Optimizing the Compressive Strength and Porosity of Metakaolin-Based Geopolymer,” International Journal of Engineering, Transactions B: Applications, vol. 34, no. 11, pp. 2525-2533, 2021.
    [    CrossRef] [Google Scholar] [Publisher Link]
  38. Minseok Nam et al., “Multi-Response Optimisation of Quaternary Blended Mortar using Taguchi-Grey Relational Analysis,” International Journal of Concrete Structures and Materials, vol. 19, 2025.
    [    CrossRef] [Google Scholar] [Publisher Link]
  39. ASTM C155-97, Standard Classification of Insulating Firebrick, Advancing Standards Transforming Markets International, pp. 1-2, 2022.
    [    CrossRef] [Publisher Link]
  40. ASTM C20-00, Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water, Advancing Standards Transforming Markets International, pp. 1-3, 2015.
    [    CrossRef] [Google Scholar] [Publisher Link]
  41. ASTM C1161-18, Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature, Advancing Standards Transforming Markets International, pp. 1-19, 2018.
    [    CrossRef] [Publisher Link]
  42. ASTM C24-01, Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials, Advancing Standards Transforming Markets International, 2001.
    [    CrossRef] [Publisher Link]
  43. Yanfeng Jiang et al., “High-Temperature Mechanical Properties and Thermal Shock Resistance of an Alumina-Fiber-Reinforced Alumina Ceramic Matrix Composite,” Ceramics International, vol. 51, no. 4, pp. 5459-5469, 2025.
    [    CrossRef] [Google Scholar] [Publisher Link]
  44. JM® Insulating Firebrick Series: Product Data Sheet, Morgan Advanced Materials, 2025. [Online]. Available: https://www.morganthermalceramics.com/media/5beap13n/jm-ifb-series_eng.pdf
  45. Barbara Ksit et al., “Numerical and Surrogate Modeling of Drying Processes in Building Envelopes under Variable Climatic Conditions,” Energy, vol. 339, 2025.
    [    CrossRef] [Google Scholar] [Publisher Link]
  46. Mateusz Smoczyk, Barbara Ksit, and Anna Szymczak-Graczyk, “Numerical Analysis of the Ground Temperature Function Depending on Edge Thermal Insulation Parameters for Shallow Slab Foundations,” Energy, vol. 314, 2025.
    [    CrossRef] [Google Scholar] [Publisher Link]
  47. ISO 1893:2005, Refractory Products: Determination of Refractoriness-Under-Load, Differential Method with Rising Temperature, International Organization for Standardization, 2005.
    [    Google Scholar] [Publisher Link]
  48. ASTM C832, Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load, Advancing Standards Transforming Markets International, pp. 1-7, 2006.
    [    CrossRef] [Publisher Link]
  49. Michel Henze et al., “Determination of Temperature Dependent Static Young's Modulus of Refractory Ceramics using RUL Tests,” International Journal of Ceramic Engineering and Science, vol. 4, no. 2, pp. 77-83, 2022.
    [    CrossRef] [Google Scholar] [Publisher Link]
  50. ASTM C210-95, Standard Test Method for Reheat Change of Insulating Firebrick, Advancing Standards Transforming Markets International, 2024.
    [    CrossRef] [Publisher Link]
  51. IPCC, 2006 IPCC Guidelines for National Greenhouse Gas Inventories, Intergovernmental Panel on Climate Change, 2006. [Online]. Available: https://www.ipcc-tfi.iges.or.jp/meeting/pdfiles/Washington_Report.pdf
  52. ISO 14040:2006, Environmental Management: Life Cycle Assessment, Principles and Framework, International Organization for Standardization, 2006.
    [    Google Scholar] [Publisher Link]
  53. Ilze Luksta, Ilze Vamža, and Dagnija Blumberga, “Development of a Mycelium-Based Thermal Insulation Material,” Environmental and Climate Technologies, vol. 29, no. 1, pp. 201-211, 2025.
    [    CrossRef] [Google Scholar] [Publisher Link]
  54. Joni Wildman et al., “Comparing Substrates for Mycelium-Based Composite Insulation Materials with Thermal and Environmental Assessment,” Scientific Reports, vol. 16, pp. 1-19, 2026.
    [    CrossRef] [Google Scholar] [Publisher Link]