Six Cylinder Diesel Engine Heat Exchanger Plate Failure Analysis through OES

International Journal of Material Science and Engineering

© 2019 by SSRG - IJMSE Journal

Volume 5 Issue 1

Year of Publication : 2019

Authors : Akshay R. Shitole, Rishi Pratap Singh, Sahil S. Anarse, Vijay S. Diwate

10.14445/23948884/IJMSE-V5I1P102

How to Cite?

Akshay R. Shitole, Rishi Pratap Singh, Sahil S. Anarse, Vijay S. Diwate, "Six Cylinder Diesel Engine Heat Exchanger Plate Failure Analysis through OES," SSRG International Journal of Material Science and Engineering, vol. 5,  no. 1, pp. 8-11, 2019. Crossref, https://doi.org/10.14445/23948884/IJMSE-V5I1P102

Abstract:

The performance of six cylinder internal combustion (IC) engine is depending on so many factors. One of the factors identified for the research work is the heat exchange assembly. The heat exchanger mainly its plate is the most vital part of the internal combustion engine. The engine oil is used for minimizing the frictional losses in the engine. The engine oil is used to remove the heat generated during the combustion process. The generated heat in the engine is absorbed by the oil is passes through the exchanger plate called as engine oil cooler. The basic function of engine cooler is to cool the oil flows and avoid the losses due to the heat generated in engine. The cooled oil is continuously passed through the hot object for maintain the temperature as low as possible. Hence the critical analysis of the heat exchanger cooler is carried out and presented in the paper. The failure analysis is carried out on the basic of the observation and the historical data and then the corrective measure was implemented to avoid the failure. It has been observed that the engine was failed due to the grace of engine oil, corrosion.

Keywords:

OES, Heat exchanger plate.

References:

[1] Ananta U. Kumbhar, Sanjay R. Kumbhar, Vijay S. Diwate “Design and Failure Analysis of Four Stroke Six Cylinder Diesel Engine Crankshaft” Issn (Print): 2393-8374, (Online): 2394-0697, VOL-3, ISSUE-6, 2016.
[2] Naresh Kr. Raghuwanshil, Ajay Pandey, R. K. Mandloi “Failure Analysis of Internal Combustion Engine Valves” International Journal of Innovative Research in Science, Engineering and Technology Vol. 1, Issue 2, December 2012.
[3] Nilesh Dimbale, Ashok Bhujbal, Rahul Hanabar, S. H. Gawande, L.G.Navale, Ganesh Daphal “Dynamic Vibration Analysis for Multi-Cylinder Diesel Engine of SL90 Type” Modern Education Society’s College Of Engineering, Pune-411001. Maharashtra, India. International Journal of Science and Advanced Technology (ISSN 2221-8386) Volume 1 No 2 April 2011.
[4] R. C. Singh, Roop Lal, Ranganath M S, Rajiv Chaudhary Associate Professor, Assistant Professor, Mechanical Engineering, Delhi Technological University, Delhi, India “Failure of Piston in IC Engines” International Journal Of Modern Engineering Research (IJMER).
[5] K. Habib and A. Husain “Failure analysis of a broken diesel engine” Materials Application Department, KISR, PO Box 24885 Safat, 13109 Kuwait (Received 3 February 1993; revised 16 November 1993).
[6] Gideon Daka Finuma “Analysis of Cylinder Head Gasket Sealing Under Engine Operation Conditions” OACETT 10 Four Seasons Place, Suite 404 Toronto, ON M9B 6H7.
[7] C. Blawert, N. Hort and K.U. Kainer Center for Magnesium Technology, Institute for Materials Research, GKSS-Research Centre Geesthacht GmbH, Max - Planck-Str. 1, 21502 Geesthacht, Germany.
[8] M Phate, S Toney , “Formulation of artificial neural network based model for the dry machining of ferrous and non-ferrous materials used in Indian small scale industries”- Int. J. Mater. Sci. Eng, 2016.
[9] MR Phate, VH Tatwawadi ,”Modeling of power consumption in turning of ferrous and nonferrous materials using artificial neural network”- Int J Eng Trend Tech, 2013.
[10] MR Phate, VH Tatwawadi , “ANN Based Model For Prediction Of Human Energy In Conventional Machining of Nonferrous Material from Indian Industry Prospective”- Journal of Production Engineering. 17 (1), 2014
[11] MR Phate, SB Toney ,”Modeling and prediction of WEDM performance parameters for Al/SiCp MMC using dimensional analysis and artificial neural network”- Engineering Science and Technology, an International , 2018
[12] MR Phate, SB Toney, VR Phate ,”Analysis of Machining Parameters in WEDM of Al/SiCp20 MMC Using Taguchi-Based Grey-Fuzzy Approach”,Modelling and Simulation in Engineering, 2019,PP-1-13
[13] Akshay R Shitole, Rishi Pratap Singh, Sahil S Anarse, Nitin Chandratre , Vijay S Diwate, Material and Failure Analysis of Six Cylinder Diesel Engine Oil Cooler Cover, International Journal for Scientific Research & Development| Vol. 4, Issue 12, 2017.